• Our site will be moving to a Virtual Private Server overnight this Saturday/Sunday, March 6-7th. This is part of a larger effort underway to engage a new add-on which should (eventually) vastly expand our searching capabilities and allow users to better utilize the 20 years of data we possess. The site will continue operating during this period, and we expect no interruption. I will make further announcements on the add-on once we complete this move and have stabilized. You can dismiss this message with the 'X' located in the upper right of this box. Thanks, //sse

Disch's latest activity

  • D
    Disch replied to the thread 35-3 Halyards.
    Thanks all for the information/feedback you provided - much appreciated, moving out with the high strength 3/8" halyard (no change...
  • D
    Disch replied to the thread 35-3 Halyards.
    Did you have any issue with the splice (at the shackle) going back through the sheave and prevent a full hoist?
  • D
    Disch replied to the thread 35-3 Halyards.
    it's an '84, with the original sheaves - with 3/8" on the main and 7/16" on the jib. Previous owner didn't put a splice/shackle because...
  • D
    I’m looking at new halyards for my 35-3. The data I’ve found shows 3/8”, but I’ve got a mix (3/8” on the main and 7/16” on the headsail)...
  • D
    Disch replied to the thread Holding Tank for 35-3.
    thanks for the sketch, i'll use this when ordering my tank. I noticed that your vent port was .75" Dia, where my current tank is .625"...
  • D
    Disch replied to the thread Holding Tank for 35-3.
    Thanks so much for the info./confirmation on the B192 and the picture is great. I too am going to stay with the current location and...
  • D
    I'm looking to replace the current holding tank (bladder type installed by previous owner) with a hard plastic tank. I checked the blogs...
Top