parts

  1. P

    Misc E29 parts needed

    I am looking for the following goodies for my E29. I thought I would ask you all before buying new. Thanks! - Interior Cushions in any condition. I will recover them if they are worn, I am mainly looking for the foam. Nice ones are bonus. These will have to be within a few hundred miles...
  2. N

    1986 E32-3 Head Faucet Brand for Parts?

    Shown in the picture is the Head Sink Faucet and the broken Valve from the cold side. I can't find a brand or model for sourcing parts. If anybody knows just what Brand this Faucet is and or where I can get new parts it would be appreciated. I did try an RV parts place and they could not match...
  3. S

    Another site having Datamarine parts

    I found a web site store which has some Datamarine parts, including transducers for the older models. For example, Datamarine Depth Replacement Core $129.99 for Datamarine Depth Sounder. For transducer models S200DL, LX201, Link 5100/6100 and All Dart models. Of course DMI still has parts but...
  4. C

    Lewmar Hatch Parts

    Does anyone know of a supplier for Lewmar hatch parts? I went to the Lewmar website and I have the part numbers. Apparently my 1983 E38 has Lewmar 'Superhatches'. I need at least one corner block (the thingy that holds the hatch down when you turn the handle. I spoke with two of Lewmar's...
  5. SASSY

    1987 E-34 parts for sale:Sails, Standing rigging, Clutches, Blocks, Furling, GPS

    Standing Rigging in great shape, changing out for offshore race rig. 10 years old home port in Naples. Complete with pins, turnbuckles and shacles. $500.00 <TABLE style="WIDTH: 618pt; BORDER-COLLAPSE: collapse" cellSpacing=0 cellPadding=0 width=825 border=0 x:str><COLGROUP><COL...
  6. S

    Yanmar 2GM20 parts

    Parting out a 2GM20 engine. Head and Block were both Magged and are clean, no cracks etc. Transmission, starter, alternator and on and on and on. If you need ANY parts for your 2GM20 send me a list and make me an offer. I didn't rebuild due to gears, cam and injection fuel pump (maybe...
  7. Sven

    Perkins spare parts kit ?

    We're have a diesel mechanic come by for a general overhaul of our 4-108(M) on Friday. What I am wondering is where we should go to get a full spare parts kit for the diesel. I assume the mechanic would be the most expensive option ? Are there any good diesel supply places I should try...
  8. F

    Need Kubota/Universal parts numbers list

    I know that somewhere, someplace I saw a list of Kubota parts numbers for the Universal 25x engine. I have a Kubota dealer in Knoxville and would sure like to save a few bucks . Does anybody have an idea where to find this list. Also, does anybody know the Kubota engine number which would be...
  9. mherrcat

    John Featherman closing parts business

    Just received a new thermostat from John and discovered that he will be closing his parts business: http://www.feathermanenterprises.com/index.html Too bad. He has been very helpful.
  10. Loren Beach

    Parts Sources...

    I just ordered up some SS tubing elbows, and thought perhaps others doing repairs and upgrades might find these links helpful. Long time participants here probably have McMaster-Carr already bookmarked ( http://www.mcmaster.com/ ). While looking for some ss elbows, I ended up browsing the...
  11. D

    Steering Parts for a 1972 E32-2?

    My boat was originally built with a tiller instead of a wheel and I'm trying to convert to a wheel. I need parts. I already have a pedestal, a wheel, and a quadrant, but the pedestal is bare. I need bearings, steering shaft, chain, and cable. Anyone have parts or know where I can get them...
  12. J

    Many new parts - Engine still in alignment?

    Hello All, This weekend I will be installing a new shaft coupling, prop shaft, dripless seal, cutlass bearing and an Indigo prop. If the engine was in alignment prior to these upgrades is there any reason to think it will be out after I install these parts? I guess I am wondering if I will...
  13. S

    ST4000 (MKII?) Wheel Motor exploded parts diagram request

    OK - The ST4000 (I think MkII) Electrical connector broke off. The PO had broken it, and we finished it off last weekend. I've got two pieces, the threads are 90% broken off in a nice ring. I'll replace it, unless it is $100. I could glue it, but is that sufficient? The Raymarine website lists...
  14. R

    Good news on Parts....

    Howdy, Any of you that has an engine with a "Kubota" base the only place to get parts is the M.G. Bryan co. in Grand Prairie Texas... email: nancy.corgill@mgbryan.com 972-6234301 and she will do the job for you. As most of you know for over two weeks I have been trying to find parts to...
  15. N

    1967 Ericson 26 Parts

    I am in need of a replacement sliding hatch for my 1967 Ericson 26. Does anyone have an idea where I may find one already made?
  16. ChrisS

    WTB: alcohol stove parts

    Kind of a longshot, but I'm looking for any working burners, and in particular, control knobs w/rods for my old Galleymaid alcohol stove. If anyone has recently upgraded to propane and has an unused stove, or knows of a consignment store with parts, please let me know. Thanks.
  17. G

    Two parts needed.

    All, I'm asking the list again for help in locating a bronze anchor lock. It's a flat bottomed, U-shaped part that bolts to the boat at the rear of the anchor shank. A horizontal stainless pin goes through the eye of the anchor, locking it into place when stowed. I'm also looking for a...
  18. B

    Barient winch parts

    While out sailing here in the desert of Eastern Washington on the Snake River today one of my winches decided to self destruct. We were beating to wind and just finished tightening up the jib, pulled off the winch handle, and the top plate of the winch decided to go for a swim. Gone...
  19. D

    Need parts

    Hi, We're refurbishing a '78 E-27. We are looking to replace some broken rub rail, particularly, the track, after a nearby anchored boat drug anchor and damaged 1 side of our boat. but can't seem to find anything to match up. Also having trouble finding fresh handrails for the same boat...
  20. D

    Need Steering Parts for 1972 E32-2 (wheel & quadrant)

    I have one of the early Ericson 32s that had a tiller instead of a wheel. I want to convert it to a wheel but am having trouble finding the parts. I have the pedestal, but still need a wheel and a quadrant. If you either of those parts and are willing to part with it, please let me know how...
Top