gatorteeth87
Junior Member
Hi all, I am pre-listing my beautiful Ericson as my plans have changed and I'm short on time! I have put countless hours into Arcadia and while there are still some things left to do, as with most any boat, what you have here is a rock solid boat with all of the un-fun projects completed and ready for you to fit her out with electronics and canvas to suit your style.
I will be sailing her south to Florida for the winter where the winter market is better and I can keep making the last few improvements but you can have her now for bargain pricing. I will also consider delivering to just about anywhere on the East Coast provided you catch me before we move her to Florida. If she doesn't sell before arriving in Florida, I will resume working on any unfinished cosmetics and canvas and bump the price. Or you can buy it and I can finish them for you! Options options 🙂 See below for most of the deets, there's literally so much to list!
You can view the listing on sailboat listings below. Email for higher resolution pics!
https://www.sailboatlistings.com/view/83106
bstevenson.ufl@gmail.com
Within the past two years, Arcadia has received the following:
-Complete bottom job including:
-Stripping to fiberglass below waterline
-Six coats of Interprotect 2000e
-2 Coats of Micron CSC paint
-All new Marelon Thru-hulls and Seacocks below WL
-All new chromed bronze thru-hulls above WL
-All new/improved cockpit drain plumbing
-Complete topsides wrap with 3M 1080
-New/updated headliner w recessed lighting
-New Cabin sole
-Brand new Sunbrella salon cushions
-All interior teak stripped/re-varnished
-Full engine room restoration
-Rebuilt transmission
-All new hoses on engine
-Updated alternator bracket installed from Catalina Direct
-New engine wiring harness
-New engine instrument panel
-Replaced all engine temp/pressure sensors
-New starter motor
Things Left to do:
-Cabin top requires fairing and painting still from core repair forward of mast
-There is a soft spot ~12"x12" on the foredeck
-Headliner in quarterberth is unfinished
-Current Electronics suite is limited to Depth, Speed, Wind and VHF
-Have frames for Bimini and Dodger but no canvas.
Equipment
Optional add ons!
-New/used Universal M25XPB engine (2005 w/ only 8hours!)--additional $2000
-Raymarine EV-100 autopilot, brand new!
-B&G Zeus 7 Chartplotter (purchased new, 2016)
-New headliner w/install for aft cabin. $1000
Included in asking price:
-New Force 10 Stove (new 2017)
-Raymarine ST60 Depth
-ST60 Speed
-ST60 Wind
-ST60 Anemoneter (new 2018)
-Airmar Speed sensor
-Airmar Depth Sensor
-Raymarine VHF
-Marelon Seacocks (new 2018)
-Marelon Thru-hulls (new 2018)
-New Deep Cycle Engine and House batteries from Batteries Plus (new 2018)
-Shur-flo 5.5 Gpm water pump (new 2016)
-Whale Gusher manual bilge pump (serviced 2016)
-New Halyards 3/8" Samson MLX (new 2018)
-New Mainsail sliders (2018)
-New Spartite Mast Boot (2018)
-New Harken Furling Drum Assy(2016)
-Newer furling line and leads
-New/Used Main and Jibsail (bought 2018)
-Engine/120VAC hot water heater
-75amp single bank battery charger
-Updated M25 alternator bracket assy. (new 2018)
-New engine wire harness (installed 2018, taken from 2005 model engine)
-New Gauge assembly (installed 2018 taken from 2005 model engine)
-2-blade Martec folding prop
I will be sailing her south to Florida for the winter where the winter market is better and I can keep making the last few improvements but you can have her now for bargain pricing. I will also consider delivering to just about anywhere on the East Coast provided you catch me before we move her to Florida. If she doesn't sell before arriving in Florida, I will resume working on any unfinished cosmetics and canvas and bump the price. Or you can buy it and I can finish them for you! Options options 🙂 See below for most of the deets, there's literally so much to list!
You can view the listing on sailboat listings below. Email for higher resolution pics!
https://www.sailboatlistings.com/view/83106
bstevenson.ufl@gmail.com
Within the past two years, Arcadia has received the following:
-Complete bottom job including:
-Stripping to fiberglass below waterline
-Six coats of Interprotect 2000e
-2 Coats of Micron CSC paint
-All new Marelon Thru-hulls and Seacocks below WL
-All new chromed bronze thru-hulls above WL
-All new/improved cockpit drain plumbing
-Complete topsides wrap with 3M 1080
-New/updated headliner w recessed lighting
-New Cabin sole
-Brand new Sunbrella salon cushions
-All interior teak stripped/re-varnished
-Full engine room restoration
-Rebuilt transmission
-All new hoses on engine
-Updated alternator bracket installed from Catalina Direct
-New engine wiring harness
-New engine instrument panel
-Replaced all engine temp/pressure sensors
-New starter motor
Things Left to do:
-Cabin top requires fairing and painting still from core repair forward of mast
-There is a soft spot ~12"x12" on the foredeck
-Headliner in quarterberth is unfinished
-Current Electronics suite is limited to Depth, Speed, Wind and VHF
-Have frames for Bimini and Dodger but no canvas.
Equipment
Optional add ons!
-New/used Universal M25XPB engine (2005 w/ only 8hours!)--additional $2000
-Raymarine EV-100 autopilot, brand new!
-B&G Zeus 7 Chartplotter (purchased new, 2016)
-New headliner w/install for aft cabin. $1000
Included in asking price:
-New Force 10 Stove (new 2017)
-Raymarine ST60 Depth
-ST60 Speed
-ST60 Wind
-ST60 Anemoneter (new 2018)
-Airmar Speed sensor
-Airmar Depth Sensor
-Raymarine VHF
-Marelon Seacocks (new 2018)
-Marelon Thru-hulls (new 2018)
-New Deep Cycle Engine and House batteries from Batteries Plus (new 2018)
-Shur-flo 5.5 Gpm water pump (new 2016)
-Whale Gusher manual bilge pump (serviced 2016)
-New Halyards 3/8" Samson MLX (new 2018)
-New Mainsail sliders (2018)
-New Spartite Mast Boot (2018)
-New Harken Furling Drum Assy(2016)
-Newer furling line and leads
-New/Used Main and Jibsail (bought 2018)
-Engine/120VAC hot water heater
-75amp single bank battery charger
-Updated M25 alternator bracket assy. (new 2018)
-New engine wire harness (installed 2018, taken from 2005 model engine)
-New Gauge assembly (installed 2018 taken from 2005 model engine)
-2-blade Martec folding prop
Last edited: