markvone
Sustaining Member
The E36RH has five sets of sliding panel doors, also known as by-pass doors. Two sets in the head, one in the galley and one to access the space under each pilot berth. All of my door panels are 1/2 inch thick teak veneer plywood. The space under each pilot berth is the largest and easiest access storage area in the boat. Because of this, these doors get used a lot and my starboard side door plastic lower track was cracked and broken into pieces.
I believe the Knape and Vogt 1/2 inch wide track is an exact match to the size of my original track. It also comes in other widths for thinner or thicker panels. It's available in 48, 60 and 72 inch lengths and in white, tan and walnut. Walnut looks to be the original color for teak interiors. The 1/2 inch track only comes in color tan so I may spray paint my lower track brown to match my teak. The upper track is hidden from view behind trim.
https://www.knapeandvogt.com/plastic-track-guides-sliding-doors?
I got mine from Woodworkers Express, cost $10 - 12 plus $12 shipping to get one of each length to replace all of my 37 year old track.
https://www.woodworkerexpress.com/Sliding-Cabinet-Door-Hardware/
Mark
I believe the Knape and Vogt 1/2 inch wide track is an exact match to the size of my original track. It also comes in other widths for thinner or thicker panels. It's available in 48, 60 and 72 inch lengths and in white, tan and walnut. Walnut looks to be the original color for teak interiors. The 1/2 inch track only comes in color tan so I may spray paint my lower track brown to match my teak. The upper track is hidden from view behind trim.
https://www.knapeandvogt.com/plastic-track-guides-sliding-doors?
I got mine from Woodworkers Express, cost $10 - 12 plus $12 shipping to get one of each length to replace all of my 37 year old track.
https://www.woodworkerexpress.com/Sliding-Cabinet-Door-Hardware/
Mark