Dave Hussey
Member III
HELP: I am looking for a RH, 2 or 3 blade prop with a diameter in the range of 11" to 13", and pitch in the range of 4" to 6".
The shaft bore size is 3/4".
This year I decided to try something: I have been suffering the consequences of motoring with a LH prop on my E27 witch has a port-offset shaft. The result is very uncomfortable due to added torque and rudder pressure, and backing down is impossible to control...so I am going to reverse the control cable on my MS Volvo gearbox and run it in the opposite direction...I'm running a Volvo MD6B 10hp diesel turning a Volvo MS reversing gearbox, with no additional gear reduction. As far as I can tell the MS provides 1.9:1 reduction on the output.
My contact info:
email = n7bqv@yahoo.com
cellular= 253-549-6992
THANK YOU
The shaft bore size is 3/4".
This year I decided to try something: I have been suffering the consequences of motoring with a LH prop on my E27 witch has a port-offset shaft. The result is very uncomfortable due to added torque and rudder pressure, and backing down is impossible to control...so I am going to reverse the control cable on my MS Volvo gearbox and run it in the opposite direction...I'm running a Volvo MD6B 10hp diesel turning a Volvo MS reversing gearbox, with no additional gear reduction. As far as I can tell the MS provides 1.9:1 reduction on the output.
My contact info:
email = n7bqv@yahoo.com
cellular= 253-549-6992
THANK YOU
Last edited: