• Untitled Document

    Join us on April 26th, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    April Meeting Info

    (dismiss this notice by hitting 'X', upper right)

Recent content by Guzzisailor

  1. Guzzisailor

    Top motoring speed with E-27 and outboard?

    Christian is correct. I have a lot of fun with my E27 but I've spent way too much on for it not being my forever boat. I'll sail it for another couple of years and then move up in size.
  2. Guzzisailor

    Top motoring speed with E-27 and outboard?

    I should have noted I have the bottom cleaned every 60 days by a diver.
  3. Guzzisailor

    Top motoring speed with E-27 and outboard?

    I have a E27 that had the inboard removed years ago and I replaced it with a Nissan 9.8 extra long shaft w/four blade prop (with no transom cutout). I have had the boat up to 6-7 knots routinely.
  4. Guzzisailor

    motoring with outboard

    If look closely I drilled a small hole through the transom so the remote control cables would work more freely without having to bend over the transom.
  5. Guzzisailor

    motoring with outboard

    On my E27 (with Tiller) I have a extra long shaft 9.9 Nissan outboard with remote control (Throttle and F/R) mounted on a retractable bracket. The Nissan remote control console is mounted near my legs where the original inboard engine controls were. I leave the outboard in a fixed position...
  6. Guzzisailor

    Built my own sliding hatch. Opinions?

    Ok, I will be the first to ask. How much do you estimate your price to make one? Very nice work.
  7. Guzzisailor

    E-27 Sheered Goose Neck (1978)

    When you take the end cap off the boom you should see a cotter pin through the gooseneck fitting if I remember correctly.
  8. Guzzisailor

    E-27 Sheered Goose Neck (1978)

    You have to take the end cap off the boom and I believe the pin on the goose neck has to be drilled and a s/s cotter pin goes in. Pull the end cap off the boom and you should see how it works.
  9. Guzzisailor

    E-27 Sheered Goose Neck (1978)

    Had the same thing happed 2 years ago. Brought it over to a local machinist who made a new one out of titanium.
  10. Guzzisailor

    UPDATED Thelonious II Noon Position Reports, 2021

    "No literature is richer than that of the sea. No story is more enthralling, no tradition is more secure." Felix Riesenberg
  11. Guzzisailor

    Climbing the mast, E27

    I use the main halyard and tie a bowline (do not use the shackle), then I use another halyard for a safety back up. You will have to have a able body seamen to help winch you up. Anytime you can relief you weight by placing your foot on the spreaders or holding to the standing rigging do so.
  12. Guzzisailor

    Swim Ladder Removal, Issues and Alternatives

    I use a rope tied to the rail and once I am up on the second rung I can grab the top rail and safely board unassisted.
  13. Guzzisailor

    E27 Mystery tang mast question.

    Loren, yes retired 30 year Master Chief. Living the dream in Pensacola.
Top