bilge design

  1. Bilge Pump v2.5

    E26-2 Bilge Pump v2.5

    Sigla came with a SEAFLO 750 bilge pump located in the center bilge compartment (crudely wired directly from the battery) and leftover wiring from an old Rule pump in the aft bilge. I replaced the SEAFLO wiring with proper terminals and stranded wire (my very first project). But the pump bit...
    • KS Dave
    • Blog entry
    • bilge design bilge pump e26-2
    • Comments: 8
    • Category: Plumbing
  2. LeifThor

    Stringer replacement help

    I’ll summarize the problem, and then give more details. I have a 1972 35-2 that needs at least one stringer completely replaced located under the floor in the middle of the cabin. I may need to replace the only other stringer running across the cabin located just in front of the engine (the...
  3. E

    Bilge design

    On my 1978 E 30, the bilge is divided into two compartments. The aft portion is separated from the midship portion by a baffle. Water must reach the top of the aft portion before it can drain through a hole in the baffle into the lower midship portion. Does anyone know what the logic of this...
Top