cabintop

I finally broke down and bought a microwave (since I like hot food on longer distance cruising) that I plan to install the way you would from underneath a kitchen cabinet. Location on my Ericson 35 MK II will be just forward of bulkhead/partition at Nav station, underneath port settee...

On my E35-2, the two little midship bulkheads that go into the cabintop both squeek in a swell. I think I need to explain better what I'm talking about. One of them sits between the stove and the settee, and the other between the nav station and the "U" shaped dinning area. They go into the...

We have the regular cabintop leak at dorade/winch pocket in front of mast but worse is poor installation by PO of Force 10 propane heater with 1" flue exiting thru teak winchpads and heat sink at 3" aft of starboard bulkhead. we removed entire unit and now have a 4 1/2" round hole in our...

I have a 1986 ER 35 III with the stainless guard over the deck box forward of the mast. the guard is thru bolted with self locking nuts on the underside of the deck and inside the headliner. A small leak has developed, and the water runs inside the headliner and is discoloring the teak cabin...

Has anyone considered covering the teak side walls (the ones with the windows) with off-white laminate (formica)? Some friends did that with their Endeavour and it really helped to update the look of the boat. I like the look of the teak but it can begin to feel like a cave because it's so...

The balsa core in the cabintop of my Ericson 35 became saturated. I didn't know how the water was getting in until I began the repair - it turned out the original construction of the dorade box was faulty. Inside the box (all 3 chambers), the seal between the slanted sides of the box and the...