grounding

Installing a galvanic isolator on Rumour, an Ericson 32-3: Any suggestions from experience, word of mouth, or hearsay on where to mount this thing? Instructions say to keep it in a dry ventilated area and it only needs to be connected inline of the green grounding conductor from the shore...

E38 Lightning Ground Plate Greetings all.. so I'm replacining the original DC and AC distro panels in my E38 and have a few questions.. Does the E38 have a lightning ground plate? Looking at the base of the mast I don't see any sort of heavy guage wires running to keel bolts or the likes...

I've spent a lot of time reading Don Casey, Nigel Calder, and the many helpful postings by MaineSail on this and other forums regarding rewiring projects. I have several charts and diagrams that I'd like to pass by everyone soon in order to get some learned opinions. First, though, I would...

So I'm refitting my A/C line to observe the 10 ft rule. The box will be pretty close to the engine compartment. So I'm wondering if I can install a ground bus in the breaker box, connect the incoming ground to the bus, run a separate wire from the bus to the block and the run another ground to...

I want to install a SSB radio on my 1990 E38. I don't believe there is a grounding mat built into the hull since I haven't come across it. Any creative ideas for grounding a SSB on an E38 or any other Ericson for that matter?

While cleaning out the raw water strainer on my boat yesterday, I moved the green grounding wire (coming out of the shore power box) out of the way. Much to my surprise, the wire was not attached to the engine. The connector was still good, but there the wire was, not attached. I don't know...

Can anyone tell me how the mast of the older (1971) Ericson 27's was grounded