rubrail

Hi there I have a 1984 E 26 and am looking to replace a 6 foot section of the aluminum rubrail. Does anyone know where to source this material? I am also looking to replace the stove as it is absent. Looking for a drop in unit does anyone know what stove was in this boat? Thanks for any insight

Hi Everybody, It seems my extruded aluminum rubrail is a little worse for wear on one side. I'd much prefer to patch up what I've got than replace the entire thing. I am unable to find the exact profile as many of you know-from past threads. My question is this; does anyone have any of the...

I got a hankering to permanently remove the rubrail and it's chalk insert. It looks like one could cut/grind off the out turned overlap of hull & deck and replace with a good old fashioned fiberglass lay up over the seam. Has anyone done this? Am I creating a problem? Thanks! Chris

This is my first winter with my 1989 E34. Rainwater leaks into the V-birth on the starboard side. The leak manifests itself where the vinyl liner meets the birth horizontal surface about 2/3 of the way back from the front of the birth. I have found several posts in the archives about similar...

Just thought I would check with you guys first. Does anyone have an 8' piece of rubrail and channel for sale? Its for My E 27. I know I can get it from wefco, just thought I would check in case that someone had some to get rid of. Thanks...

Hi all, I'm looking for an 8' piece of rubrail for my 38-200. I understand that the rubrail is the same for most 80s Ericsons. So if you have a lenght of the original rubrail sitting around or are planning to replace your entire rubrail with something new and would be willing to part with your...

I'm trying to stop up a rainwater leak into the galley storage area on my 1976 E-32. I've rebedded the stanchions in the area and the only culprits left (that I can see) are the outboard headsail track and the rub rail.<O:p</O:p <O:p</O:p First: I don't see any signs of the sail track being...

Anyone know how or where I can replace the Bow Bumper Rail on a Ericson 35? I unscrewed the 2 bolts and took off the one side that was still intact. Looks like the front bumper just goes over the rubrail and there is just some putty or resin fill under the bumper.I bought her like this last year...

We did something wrong and will try to figure out what. We got the buoy paint to chemically seal the rubrail and stop the chalking. This paint doesn't dry but actually chemically bonds with the rubber so it should be perfect. We sanded the rail lightly and then rubbed it down with...

In addition to swapping out the four AGM T27s this weekend we're also hoping to paint the rubrail. We picked up some of the recommended "Aquagard Flexbar PVC and Infatible" paint: http://www.jamestowndistributors.com/userportal/show_product.do?pid=52254&BASE I know that if properly applied...

I'm going to be installing the Wefco rubrail on my E27 and need the 2 end caps at the stern as well as the caps or cap for the bow. Does any one know if a cap is availible that wraps around the bow? I currently have wood which is damaged and it has the original two caps at the stern, but the...

Having trouble locating a rubrail insert for a "72 E-29 that I've been restoring & upgrading. I saw one recently posted, but it already got snatched up! Looked @ Wefco & Rubrails.com but no dice. How do I get one or is there a reasonable substitute in existance?:esad:

The aluminum extrusion on the E38 we tried to see yesterday looked like it had been attacked by aluminum termites :-) It probably wasn't as bad as it looks but I wonder if we should expect the damage to be more than cosmetic ? -Sven

Am fixing some minor damage on a recently aquired E29 from '72. Where can I get a rubrail, both the metal and the rubber, new or used? :esad:

$200 reward for a 8' piece of rubrail. It's 2" tall 1 3/16"deep made of plastic or PVC and is light grey, probably considered white. I would like 8' but can get away with 4'. If anybody has a piece of this laying around it would sure help as rubrails .com and the manufacturer that the pic came...

I own an Ericson 28, which has aluminum rubrails. My problem is that it is missing the end cap on the portside bow. Anyone know where I can find a replacement? Richard

Hello, I'm sure this topic has been covered before, but it is a long hunt for the answer through all the threads.... Does anyone know where the original aluminum solid rubrail for the late '80's boats can be found? I would like to keep the original, but it seems hard to find. I have seen...

In the course of doing some interet sailing, I came across the following Ericson rubrail for sale. Not affiliated with the add, just passing it along in the event anyone if looking for rubrail. regards shaun http://www.sailboatowners.com/gear/display.tpl? fno=400&gid=73301733440.5

I searched the archives to see what a nice rubrail replacement would be. I tore off or severly bent about 25-30ft during the recent collision with the Hunter45 during the storm. PS doesn't carry the Aluminum replacement anymore, and I'm thinking of going with a new TACO METAL rail all around...

Can anyone match the Ericson standard rubrail insert to the inserts at <www.tacomarine.com> ? Pacific Seacraft does not sell the inserts any longer and the number on the webpage not not indicate the manufacturer.

The rubrail on my '89 E38-200 is shot. I need to replace the vinyl insert and the aluminum rail that is screwed to the hull at the join of deck and topsides. I've talked to Pacific Seacraft but all they seem to have is a much wider (and very expensive) rubrail that is quite different from what I...

I have a 1977 E27 that needs a rubrail replaced, anyone know of somewhere that may have decent used rubrails? Right now I'm hoping to find just a few feet to replace the section that was damaged, otherwise I'll have to buy 40' of it new. Thanks.

:esad: Looking for folks with water leak experience in the deck to hull connection (under the rub rail) on an Ericson 32 (1978). We were on the return trip from a Long Beach (CA) to Catalina trip, with the starboard rail at the water surface, when we discovered water sloshing above the sole...

I need a source for the rubrail assembly on an eigthy-three model Ericson 30. Has anyone dealt with this lately?