Is there a trick to filling the fresh water tanks? I'm almost embarrassed too ask, a pretty basic operation that I've done numerous times but this weekend I think I figured that I either can't fill them to anywhere near their capacity or I'm not able to completely pump out their contents.
Decided to clean out my water system this weekend using bleach and during the numerous fillings and pumping outs, something just didn't seem right. I was either filling the tanks awfully fast (No) or my fresh water pump was pumping it out quickly (again No). Knowing this isn't rocket science, I've gone over every scenario that I can think of but I haven't come up with the answer.
I have 3 tanks, and each behaved in the same manner. Stock Ericson fresh water setup with the exception that I added a water filter a couple years ago. (bought from Lowe's)
Tank vent seems to be working fine
OK guys, what am I missing?
Thanks-
Decided to clean out my water system this weekend using bleach and during the numerous fillings and pumping outs, something just didn't seem right. I was either filling the tanks awfully fast (No) or my fresh water pump was pumping it out quickly (again No). Knowing this isn't rocket science, I've gone over every scenario that I can think of but I haven't come up with the answer.
I have 3 tanks, and each behaved in the same manner. Stock Ericson fresh water setup with the exception that I added a water filter a couple years ago. (bought from Lowe's)
Tank vent seems to be working fine
OK guys, what am I missing?
Thanks-