vanilladuck's latest activity
-
vanilladuck replied to the thread E32-3 keel bolt compromise?.Ah I see now. I just found this post, which also shows the rough location of that cutout... -
-
The yard guys determined that the gelcoat (it is porous) had not fully dried before the previous yard put the barrier coat on. Sounds...
-
Here's a photo of the access in the setee floor: Mine had a poorly-cut rectangular shape I could barely get my hand into, so I...
-
vanilladuck replied to the thread E32-3 keel bolt compromise?.Thanks so much for relaying this info @Kenneth K ! I've always wondered why that hole is there. The PO for the boat told me it was for...
-
Hey Bryan, sorry you found some bad news on your keel bolts. FYI, there are six 1" and one 1/2" keel bolts on the 32-3. The...
-
vanilladuck replied to the thread E32-3 keel bolt compromise?.Thank you so much @peaman -- your supportive and kind thoughts have landed on thankful ears. I make a practice of laying down in the...
-
vanilladuck replied to the thread E32-3 keel bolt compromise?.@Pete the Cat, when you say "wet", do you mean the gelcoat resin is wet? Or that the boat has been in the water for years? The current...
-
-
That looked pretty tough. If this development brings on light-headedness, try to lay down on one of the settees in the salon and focus...
-
vanilladuck replied to the thread E32-3 keel bolt compromise?.Well, Rumour is on the hard again for a haul out. Maintenance items include new prop, new motor mounts, bottom painting, glassing or...
-
Yep. And since you'll be disconnecting the fuel lines anyway, probably makes sense to replace some of the old lines, especially the...
