black

Probably a dumb question but i cant fine a for sure answer. If I construct an exhaust elbow riser out of black iron and bronze pipe, are they compatible?

Mr. Niche has been escorted from the site and banned for his black bean salad promotional cross posting. Have a nice day! :egrin: //sse

My mast needs some touchup, I know it should be repainted, but I was thinking about just touching it up while it is still stepped, and I'm wondering if anyone has used a flat black paint that is a good match. Thanks

Does anyone know the best way to strip the black paint off the mast of my 1982 E-38? Is it all done by sanding? Or is there a stripping chemical I should use? Of all the work I have to do, I just know this is going to be the suckiest!!! Don

I am heavily favoring the Furono 1832 VX2 chart plotter/radar set up likely with the 22 inch radome versus the 18 inch. i'm deliberately staying away from Raymarine because I despise their fixed cost repair approach. With the mount that I purchased on Ernie on this list, I plan on having a...

Hello All, My '83 E38 has some water in the bilge most of the time from rain water coming down the mast or the stuffing box seepage. Maybe 1/4" to 1/2" at most. The strange thing is the bilge water turns black, especially in the aft-most keel well. Any particular reason for this? Obviously...

Has anyone attempted to build a heat riser/muffler completely out of black pipe and fittings? It should work out to be about $125 as opposed to the 385.00 that PSC wants. I'm not opposed to ordering parts from PSC but that's a little steep for some piping. If I have this figured out...

Listmates, I have a 1989 Olson 34 with a Universal M25XP 23 h.p. diesel engine. It has been quite reliable. For better or worse, the only service I've done is changing the oil twice a year, changing the zinc in the ?heat exchanger, and changing the fuel filter. Now, the engine puts out black...

I have a 1985 E32-III with a Universal M25 Diesel & a feathering Maxprop. Last year I replaced the "riser" and all of the hoses exiting the manifold. This year I am noticing that when I put her in reverse...I notice black soot on the water after backing down? I have tried running it hard in...

I started sanding that corner area of the cabin sole in my head last night, and the teak there is/was black. I knew that there was some water damage and rot in that area, however I don't think I need to completely replace it just yet - but I would like to refinish it (the entire cabin sole)...