• Untitled Document

    Join us on April 26th, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    April Meeting Info

    (dismiss this notice by hitting 'X', upper right)

e41

  1. svAlma

    Got it last year, just found the site: 69 E41

    Hey everyone! I'm Chris. I picked up a beautiful 1969 41' recently refit yacht in FL back in August 22' for my wife, daughter and myself to explore the world.. a friend had bought it from some youtubers and didn't use it over the 1 year, plans changed, so he sold it to me. I did 1700nm of mind...
  2. R

    1969 E41 Keel Material?

    What material (lead, iron, ???) was the encapsulated keel made of on the early (ie: 1969) E41s?
  3. W

    '69 E-41 keel question

    I'm considering an Ericson 41 for Florida Coastal and Carribean cruising. The boat has an encapsulated 6' keel a bit long for my intended use. I've contacted Mars Metal in Canada to see if I can get some info on adding a bulb to take about 1' off the keel. My questing to the owners is, the...
  4. V

    any E-41 owners willing to part with information?

    I need info on a few projects I'm working on. raw water system, cockpit control panel, rigging, etc... I'm finishing up a restoration, well at least close to finishing and will be launching soon. E-mail me or we can talk directly the old fashioned way... by phone vanfuego@yahoo.com or...
  5. V

    E-41 Island Bird vee drive...any info?

    I have been routing the raw water system on Island Bird(an E-41) and I have a few questions regarding the vee drive. I have a westerbeake 4 107 and the shaft goes forward into a walter vee drive(I'm not sure wich model) however I do know that the raw water enters the boat through the sea cock...
  6. V

    New member has E-41, needs information on running rigging.

    Hello! I am stringing up my mast. Its the first time since i have owned this boat. I purchased it in the fall of '08 and following a small number of projects I am now ready to step the mast. Can anyone give me some info on running back stays for a marconi rigged sloop. The mast is rather tall...
  7. V

    new E41 owner needs info

    deleted post deletd message
  8. B

    E41 Rigging Diagram

    I just bought an E41 with almost no rigging still attached. I'm very lost and trying to figure out what I need to buy and how it all goes together. Was there a rigging diagram with the original paperwork (mine's lost), or does anybody have one? I'm just a hair above being a complete novice...
  9. flit

    E41 hull lines

    Can anyone sugest a place to look for a simple drawing showing thw lines of the Ericson 41 hull? Thanks, John
  10. flit

    Asking for advise on E41

    I am from Orcas Island and have an accepted offer on a 1969 E41. I was wondering if anyone has advice about things to watch out for during survey..... general thoughts on the sailling characteristics..... or just a word of advice. You can see my last boat at www.rockisland.com/~flit .... An...
  11. CaptDan

    E41 Hull #1

    Sure is a beaut: http://seattle.craigslist.org/see/boa/649587260.html Capt Dan G>E35II "Kunu"
  12. J

    E-41 deck construction

    i have been looking at several 1970's era E-41 and all seem to have leaks in the deck around the chain plates. I am seriously considering buying one. Does anyone have any information on how the deck is constructed ? In most of the boats i have looked at the wood on the cabin inside by the...
  13. K

    E41 Keel/Rudder

    An E41 I am thinking about buying has had a 'Skeg' added to the bottom between the keel and the rudder-is this a common modification? Is it a good idea, a bad thing, or....? I understand that the rudders were not really well made-were all of the 41's palgued with rudder problems, like Ralph...
  14. K

    E41 Masts

    I am seriously considering buying an Ericson 41 and have a few questions about these older Ericsons. THis boat lost its original mast early in its life and was replaced with a single spreader heavy section rig. What concerns should I have about this change? Was it apositive change, negative...
Top