insulation

I have a question. Anyone here removed the icebox on 1972/78 - E-32/E35 to replace insulation. Removing the cabinet above the counter top is not a problem. What was involved to remove the counter top ? How it is attached to cabinet ?

Hi all, 1976 E 32 (Atomic 4) Last year I bought some fiberglass tape for exhaust lines from West Marine. My engine exhaust pipe from my engine to the first elbow was exposed It is the stuff that comes with a thin aluminum cover. I wrapped the pipe with the aluminum foil on the outside. My...

While my E27 is out of the water (being completly repainted along with a host of other things), I pulled my prop and found it to be a 10/6. Other atomic owners I know have 12/6 or 10/7, (all 2 blade). I spoke with Don Moyer who also seemed surprized that I had a 10/6. I thought about making it a...

We're still going through our "new" E39-B, creating the project list which we'll be working off over the next year or two. One project is conversion of the ice-box to a fridge/freezer, or at least a fridge. The current standup norcold 12V fridge will be fine while near dock-side but it...

My E29 has a ~1 inch thick panel of what I assume to be fireproof insulation attached to the inside of the engine compartment cover. Its breaking down and I'd like to replace it. I've read about Soundown on this site but it looks like its is hard to work with. Any suggestions ??? --Paul...

My ’88 E34 came with a rigid, box like, insulation panel that is screwed into the bottom or underside of the refrigeration lid. Does anyone know where to get a replacement as mine has gotten very ugly.

Has anyone rebuilt/re-insullated their icebox on an older Ericson? What was involved?

I am in the process of replacing the engine compartment insulation and got going on it yesterday. It is a REAL PITA with the engine in place, but I got all the pieces cut and installed. Still need to go back and add a few more fasteners but I need a right angle drill to do that. I used 1 1/2"...

Has anyone tried to add any insulation to their hull? Most of my boat is bare fibreglass on the inside right now, which would be easy to line with something suitable before taking the boat through some more extreme climates than California. Gareth Freyja E35 #241 1972

Has anyone put a fridge unit in on a 35II? If anyone has, what unit did they use? I am wondering about Ice box square footage and what needs to have insulation added. Thanks, Chris

I need to improve my insulation on the ice box in my E27. Does anyone have any ideas etc. on how to better insulate the box/

Our E-39B still has the original wood lid/door for it's fridge. It's 5/8" thick with no insulation at all. It comes as no surprise that the top half of the space stays a little cooler than room temperature, while the bottom half is frozen solid. I think adding some foam to the lid would probably...