throttle

I have a 1976 E27 with a late model Atomic 4. I working on the engine to get it started for the first time since I bought it and I am hoping to clarify a strage thing the seller told me. He Said that the throttle on the board is backword, which is to say to to accelater you pull it back. I...

Hi! I am new to the forem. My son & I sail a 1987 Erickson 28. The wheel froze leaving the slip & we discovered that the throttle-mount is bent, interfering with the wheel chain. Anyone have a brand for the pedestal or any drawings of the internal workings? Any ideas how to pop the throttle...

My throttle and shifter handles have "disappeared". On a quick look I was unable to find a manufacturer name on the housing, and I don't recall ever seeing them on any supply sites or catalogs. Does anyone know the original manufacture for a 1976 E27 or know where the handels can be found. Are...

I know I'm not the only one using a bungee to hold the throttle open on my E32-200 (with Edson steering pedestal, Universal M25XP engine). Does anyone have a cure for keeping the throttle in the full position? There is a screw inside the pedestal that I originally thought was a tension...

I'm the new owner of an 1978 E 35 w/yanmar diesel engine. Going over the boat discovered the throttle cable /housing is shot and I want to replace it. Looks simple enough to remove the cable from the engine, but the end in the binnacle has a set screw holding the housing and is difficult to get...

Hello to all: We have replaced the throttle cable (morse 33c) in our Yacht Specialties pedestal steering and now it works so well we need to find a way to lock it at a given setting. Any advice will be welcome. Thanks Bob H E30 II 1979 hull #47 :egrin:

the throttle lever is backwards. all the way forward it idles. all the way aft is full throttle. i believe that it should be the other way around. how do i reverse the action of the throttle lever ??? thanks greg s/v dalliance 74 35 II # 325 wilmington,ca happy sailing

I have an '88 E34 (M25xp engine) with an annoying throttle problem. It won'y stay where you put it. Rather, it slowly goes back to low rpms on it's own. You can see the throttle lever moving. I took a quick look at the cable mounting on the engine but didn't see anything for setting throttle...