Available in Anacortes, WA (happy to drop off anywhere between here and Portland next time I make that drive). I'll also ship anywhere if you want to pay for it. Everything is from my 1984 Ericson 38.
- Complete set of the large glass deadlight windows with frames and gaskets, all in pretty great shape, but of course plenty of butyl tape to clean up
- Barient 19 self tailing winch. This is the main working winch from the cabin top that handled main sheet/halyard duties. In great shape, I just replaced mine with one that uses volts & amps
- 1 custom built chain plate for one side uppers/intermediates.
- This one gets a short story: When I redid my standing rigging I replaced the u bolt chain plates + upset toggles with some custom fabricated typical deck chain plates, since this turned out to be basically just as cost effective (and likely less prone to failure) than sourcing NOS navtec u bolt fittings. I should have known better but I measured the port (I think) side and had two of those fabricated. Turns out the two sides have different bolt hole spacing. So I've got an extra starboard (I think) chainplate. If your considering a re-rig, I'd be happy to include the designs for all 6 chain plates and give you one to get started with. I had Svendsens Marine in Alameda fab mine and they turned out beautiful.