Gear and throttle cable replacement 38-200

[Drakkar]

What are the length of the gear (fwd/neutral/rev) and throttle cables for the 38-200?

 

[AlaskanPuffin]

I will measure them for you next time I'm down at the boat if someone else doesn’t answer first.

 

[Joliba]

What are the length of the gear (fwd/neutral/rev) and throttle cables for the 38-200?

It depends how directly you route them and if you have the 38-200 with the engine in the galley or with the engine beneath the companionway.

 

[Drakkar]

My engine is under the companionway

 

[Drakkar]

I will measure them for you next time I'm down at the boat if someone else doesn’t answer first.

That would be nice, thank you

 

[Christian Williams]

Length is variable, whatever fits well. Bend radius matters. Much written about here:

Improved Control Cable Run

After a very long Saturday afternoon aboard, I finally was able to install new engine control cables aboard my E-38. On of the original cables had snapped right where the factory had run it through a 3" diameter bend, in spite of the Morse spec that the bend be no tighter than 8". For the...

ericsonyachts.org