-
Untitled Document Join us on November 22nd, 7pm EDT
for the CBEC Virtual Meeting
Adventures & Follies
All EYO members and followers are welcome to join the fun and get to know the people you've met online!
See the link below for login credentials and join us!
(dismiss this notice by hitting 'X', upper right)
Original backstay adjuster - inspection and maintenance?
- Thread starter adam
- Start date
Best Backstay Adjusters Ever. Still Made
These are a Barbarossa/ Harken product.
B501 manual should get you a break out.
They can be disassembled, cleaned, checked for wear, greased and reassembled.
Guy
These are a Barbarossa/ Harken product.
B501 manual should get you a break out.
They can be disassembled, cleaned, checked for wear, greased and reassembled.
Guy
adam
Member III
Thanks Guy.
It looks like mine is very similar to the 500, but mine is perhaps a bit older as it has 4 bolts holding on a faceplate. Looking at the replacement model gave me the confidence to break her open and take a look.
http://www.harken.com/uploadedfiles/Product_Support/PDF/M1006.pdf
It all looks good though it needs the old slightly crusty grease cleaned out and replaced.
It looks like mine is very similar to the 500, but mine is perhaps a bit older as it has 4 bolts holding on a faceplate. Looking at the replacement model gave me the confidence to break her open and take a look.
http://www.harken.com/uploadedfiles/Product_Support/PDF/M1006.pdf
It all looks good though it needs the old slightly crusty grease cleaned out and replaced.
Last edited: