As the gut and remodel continues, I am removing the original corrugated bilge tubing that led from the forward tray back to a manual gusher pump. That tubing ran straight back along the centerline of the boat, until it almost meets up with the engine (you can see the little angled piece just forward of the engine). It then jogs starboard and then continues after under the coffin berth. I have removed it everywhere but at that engine jog (see picture). Before I cut into the backside of the pan (the engine came out on Saturday ), has anyone had better luck yanking that hose out? I would like to use that channel again for the replacement system...
Thanks for all the help,
John
"Pickle" / 1985 E26
Thanks for all the help,
John
"Pickle" / 1985 E26