EricsonYachts.org has opened the season for raising funds to support the expenses of the site. If you would like to participate, please see the link below for additional information.
Thanks so much for your continued support of EricsonYachts.org!
Summary:
I changed the packing flax material on my propeller stuffing box. It seems that no one had done this job for several years, so the difficult part was getting the packing nuts loosened up to begin with, and then extracting what I believe was the wrong-sized packing material. I am...
Context: About to adjust the stuffing box on the E32-3 as it's dripping a little too much for my, albeit novice, taste. A drip every 2-3 seconds at the dock and a few drips a second underway in forward gear. I'm reading that it should be no drips at the dock and a 2-6 drips per minute with the...
Ok, tomorrow I re-pack the rudder packing gland and would like to do it right.
This gland, which may be Yacht Specialties, has four bolts--not three, like the similar Edson model.
In this design, both flanges are meant to be installed hard together. There is no adjustment to regulate...
Ever since we got our E32-3 there has been a salt water leak past the rudder post stuffing box. Lots of salt crystals in the boat. After the last haulout I pumped a ton of grease into the cavity between the rudder post lower bushing and stuffing box. To my pleasant surprise no more leak. The...