Canopus
1989 35-3
I've got some questions on what (if anything) I should do about this issue. Basically the two main bulkheads, aft of the head on port and aft of hanging locker on starboard, are both lifted about half an inch. Apparently this was due to loose tabbing so PO had tabbing redone. New tabbing was placed along the bottom of each bulkhead which looks solid, but the bulkheads are now fixed a half to 3/4 inch high which pulls up part of the settees.
Would this pose any problem as long as the the tabbing is sound?
There are chainplates attached to the port bulkhead so that is my main concern. Nothing is putting tension on the other side.
I'm thinking of just unscrewing the setee from the bulkhead, pushing it down and reattaching it.
Would this pose any problem as long as the the tabbing is sound?
There are chainplates attached to the port bulkhead so that is my main concern. Nothing is putting tension on the other side.
I'm thinking of just unscrewing the setee from the bulkhead, pushing it down and reattaching it.
Last edited: