Mike Johnson
New Member
G-day or nite fellow ericson fans, I have a couple of projects lined up. One is replacing the gate valve in the head. The head sole is aprox 3/4" above the hull. The backing plate is between & the gate valve nut is above the sole.. So far no leaks.. Any suggestions for replacing the g-valve w/ a ball valve?? Should I leave the old backing plate & copy the present setup???Next I plan on replacing the old rigging.. My calipers showed the wire to be 1/4" or just a hair less.. I am inclined to replace all with 1/4"" Any ideas or suggestions???? Thanks for any help....Mike