Hopefully someone within driving distance will want this stuff, altho I could ship as long as the seller covers the s/h cost. I would have to buy a long shipping tube for the tracks, for instance.
(I sure miss the big Seattle spring swap meet, before the pandemic rearranged our world...)
Now that we are well along with our re-fit, there are surplus parts that have been replaced with new items.
Everything here works fine, but they are dull from exposure.
Lewmar Clutch Stopper, from the mid 90’s. Heavy duty D-2 model, 3/8” to 5/16” line sizing. This held our 5/16 T-900 halyard with no slips.
$20.
Tempress screw-out Deck Plate. Gray plastic. Outer flange diameter is 6.0 “, Center access is 4.0”, and the cutout diameter is 4.5”
$1.
Deck Organizers, Lewmar Four sheave. 1/2” line size max or maybe a tad more.
Two of these: plastic sheaves in each except for one aluminum sheave.
EY had originally run a wire-to-rope halyard thru the aluminum sheaves. 1/4 X 20 FH screws provided. The attachment screws go down thru races in the center of each sheave, four screws per organizer.
Size: Each is 10” long. Holes are 2 1/4” center to center. All sheaves are in excellent condition. Solid axle.
$20. each.
Winch Handle Holders. - Two. White vinyl.
Model = NM #10831. Total height is 12 inches and they hold a standard 10” handle.
$3. total.
T-Track. Anodyed Aluminum. Size= 1 1/4” (long and shorter Genoa tracks, port and starboard)
2 pieces, Merriman 30.5” long each
2 pieces Merriman 62.5” long each.
1 piece (no brand, but it’s unused) 21.5” long.
$50. for all. Bargain!
Harken Traveler and Harken recirculating ball bearing car. This included the factory extension plastic track to move/dismount the car off the track end without losing the bearings.
Track is 4 feet long, 1.25” wide, 3/4” high. Eleven 5/16” bolts on 4” center. Plus two Harken end caps that also thru bolt.
The car is 5.25” long and includes two Harken ball bearing blocks for part of a traveler control system.
Traveler System= $65. Bargain! -just marked down!
Stay tuned: Teak hand rails coming up soon and all of the Lewmar opening ports.........
(I sure miss the big Seattle spring swap meet, before the pandemic rearranged our world...)
Now that we are well along with our re-fit, there are surplus parts that have been replaced with new items.
Everything here works fine, but they are dull from exposure.
Lewmar Clutch Stopper, from the mid 90’s. Heavy duty D-2 model, 3/8” to 5/16” line sizing. This held our 5/16 T-900 halyard with no slips.
$20.
Tempress screw-out Deck Plate. Gray plastic. Outer flange diameter is 6.0 “, Center access is 4.0”, and the cutout diameter is 4.5”
$1.
Deck Organizers, Lewmar Four sheave. 1/2” line size max or maybe a tad more.
Two of these: plastic sheaves in each except for one aluminum sheave.
EY had originally run a wire-to-rope halyard thru the aluminum sheaves. 1/4 X 20 FH screws provided. The attachment screws go down thru races in the center of each sheave, four screws per organizer.
Size: Each is 10” long. Holes are 2 1/4” center to center. All sheaves are in excellent condition. Solid axle.
$20. each.
Winch Handle Holders. - Two. White vinyl.
Model = NM #10831. Total height is 12 inches and they hold a standard 10” handle.
$3. total.
T-Track. Anodyed Aluminum. Size= 1 1/4” (long and shorter Genoa tracks, port and starboard)
2 pieces, Merriman 30.5” long each
2 pieces Merriman 62.5” long each.
1 piece (no brand, but it’s unused) 21.5” long.
$50. for all. Bargain!
Harken Traveler and Harken recirculating ball bearing car. This included the factory extension plastic track to move/dismount the car off the track end without losing the bearings.
Track is 4 feet long, 1.25” wide, 3/4” high. Eleven 5/16” bolts on 4” center. Plus two Harken end caps that also thru bolt.
The car is 5.25” long and includes two Harken ball bearing blocks for part of a traveler control system.
Traveler System= $65. Bargain! -just marked down!
Stay tuned: Teak hand rails coming up soon and all of the Lewmar opening ports.........
Attachments
Last edited: