E32-3 holding tank hoses

[nbolds442]

Anyone have any experience with replacing the pump out and vent lines? They're not looking like replacements will just slide back in.

There is a little duct thing that I may just cut into, but it's fiberglass, and I'm concerned that it's structural.

Forgot to get pictures, will probably be there tomorrow if needed.

 

[Loren Beach]

Just to clarify, your bio shows an Ericson 32-3. True?
Note that you can put that info, and your sailing area, into your Sig Line. This will help others searching for info, and often enable them to assist you.

 

[nbolds442]

Just to clarify, your bio shows an Ericson 32-3. True?
Note that you can put that info, and your sailing area, into your Sig Line. This will help others searching for info, and often enable them to assist you.

 

[nbolds442]

Thanks, I'd put it in the title, but forgot to put it in the body.

 

[goldenstate]

Thanks, I'd put it in the title, but forgot to put it in the body.

I replaced one hose (I think from my Y valve to the seacock). My only bit of advice is to buy a quality flexible hose. The inexpensive white ones at West Marine are frustrating to work with. I think the better one I bought was called SaniFlow.

 

[Christian Williams]

might be something here:

How do you Remove Head Hoses? [Master Thread]

Hi folks, Early year project is to replace all the head hoses and replace the PHII pump. My system currently runs from the head to the Y valve underneath the sink, and then out towards the hull, forward to the holding tank in the port V-berth. The deck fitting hose runs out from the holding...

ericsonyachts.org

 

[nbolds442]

might be something here:

How do you Remove Head Hoses? [Master Thread]

Hi folks, Early year project is to replace all the head hoses and replace the PHII pump. My system currently runs from the head to the Y valve underneath the sink, and then out towards the hull, forward to the holding tank in the port V-berth. The deck fitting hose runs out from the holding...

ericsonyachts.org

Thanks that helped a lot.