I will be flying an asymmetrical spinnaker or cruising chute on my E29, and need advice on the best method of turning spinnaker sheets back to the winches from as far aft as possible. I dont think genoa blocks are the right solution. Garhauer is recommending foot blocks that can handle at least 4,000lbs SWL, and these would be mounted on the aft part of the foaming where the winches sit. Could also go with snatch blocks on the genoa track, but would need a custom track car made to handle same load. Which is best? Does the sheet angle from coaming level versus track level make a big difference? Thanks!