frosero7744
Member II
Just bought a 1990 Ericson 32 200 in Alameda this last weekend. The inspector was OMG thorough and sent a honey must and honey do at leisure. Im looking for any advise or pointers for completing. This is my first real boat with mucho systems to monitor and maintain. Thank you for all y'alls patience. Been following this site for over a year already. This boat has the Yanmar diesel.
Honey must
1. Replace Exhaust hose. Access suggestions? manufacture?
2. remove squeeze bulbs from fuel line (PO used them to prime after a filter change, any opinions here? seems functional)
Honey do's
1. Install a high vent loop for the engine cooling water
2. Install a sea water strainer for engine cooling
3. Add a water lift muffler with a high loop in the exhaust hose
4. Install a fail safe galvanic isolator. The prop has some pitting presumed to be from Dc leakage somewhere.
5. Replace the fuel vent hose
fernando
Ericson 32 200
Bona Venture
Honey must
1. Replace Exhaust hose. Access suggestions? manufacture?
2. remove squeeze bulbs from fuel line (PO used them to prime after a filter change, any opinions here? seems functional)
Honey do's
1. Install a high vent loop for the engine cooling water
2. Install a sea water strainer for engine cooling
3. Add a water lift muffler with a high loop in the exhaust hose
4. Install a fail safe galvanic isolator. The prop has some pitting presumed to be from Dc leakage somewhere.
5. Replace the fuel vent hose
fernando
Ericson 32 200
Bona Venture