Andy -
Here's the poop (so to speak) on the sanitation system:
The hose is the Trident 1.5" premium sanitation from BoatUS. The head is a Wilcox-Crittenden Skipper II also from BoatUS. The Y valve is the good Jabsco model from Fisheries Supply, Seattle. The loop is the big bronze bugger from Groco from Fisheries Supply, Seattle. The pump is the Whale Gusher 10 MKiii from BoatUS (same make/model as before, but without the 5200 on the inlet.
When you get the tank from Ronco, it won't have any fittings on it. I got all mine from Fisheries Supply in Seattle. The only thing I used to secure the fittings was three or four wraps of the teflon (plumber's) tape. Ronco said under no circumstances to use any type of sealant (we'll see...).
If you buy the premium sanitation hose, do yourself a favor, and buy the $20 hard nosed snips also (from Home Depot). The wire that's inside that hose is a real !@#! to cut - and the cutters will help you stay sane! Oh - also: all the hose clamps are 316 grade stainless - no more rusting - at all.
I'll be up dating the project next week - the entire mess gets installed this weekend! Please let me know if you would like to know anything else!
Thanks,
//sse
[Edited by Sean Engle on 02-19-2001 at 10:10 PM]