e32

I am the new owner of a 1972 Ericson 32 (not sure if it's a E32-1, or E32-2, etc. would appreciate help understanding the differences) with a broken mast. I am currently looking around for a replacement mast. I have all the mast hardware, including boom, and I'm wondering what my options are...

Looking for advice on proper alignment of the strut that holds the prop shaft on a 1971 E32. Mine is bent to the starboard side and also appears to be canted "up" too much in the front. The strut appears to be made of bronze and molded into the hull. I'm considering heating it up and putting a...

I'm looking for a Used Mainsail for my E-32.....any suggestions :)

Our rudder stuffing box is leaking. Looking at a previous thread the problem is addressed for a 35-2. Is the 32's the same ? Can any 32 owners offer any advice. The stuffing box has the 4 bolts as described in the specs,but ours looks a little different than the drawing. Would like to also...

I had to loosen/remove part of the steering quadrant due to alignment and failure of structure. The boat is E32, 1971-72. while the steering is loosened, I tried to check for rudder play from outside the hull. The rudder "play" seems to be about 1/4". Prior to this w/ all steering cables...

I'm going to replace the head rather than rebuild. Leaking connectors and the fixture is exhibiting its age and smell. The boat is 30 years old and the head is a Raritan"compact". Does anyone have feedback -do's-don'ts?

I am interested to learn if your Ericson 32 is still for sale. If so would appreciate some photos and specs. I need 6'2"+ headroom and prefer wheel steering. Many thanks. Charlie Virginia Beach

Been sailing with a bent boom and an old main for about a year. I think It might be time to replace both. Used would be a little more realistic. Any thoughts let me know.:egrin:

Any advice on how to tune the rig on my 1974 E-32-2. Thanks. kemprp@aol.com

Hull number 521. Rudder post is leaking on the forward side of the tube about 3 inches above the inside of the hull. There is a rubber boot (3.5" x 5.0") covering the the section of rudder post tube between the bottom of the packing gland flange and the bottom of the tube. I replaced the pipe...

Boat Wanted Ericson 32 or 34 Wanted

Hello Ericson owners,,, I need to install a holding tank in my 70 E-32. It appears that my locations are limited,under the port dinnete next to the bulkhead,or under the middle seat. I have been told that there isn't any room under the V-berth.Any suggestions??Are there any "off the shelf" tanks...

I have an old E32 which I use for an educational project in the Northeast. In order to raise funds for this program, I am exploring the possibility of leasing the boat during dormant seasons, possible during the winter in a southern climate and possibly during July and August in the Northeast...

G-day or nite fellow ericson fans, I have a couple of projects lined up. One is replacing the gate valve in the head. The head sole is aprox 3/4" above the hull. The backing plate is between & the gate valve nut is above the sole.. So far no leaks.. Any suggestions for replacing the g-valve w/...

Potential Buyers!!!! If you are on the tall side and still want to enjoy sailing the E-32 is for you. If you are tired of banging you head against the backstay while docking or tacking, the E-32 is for you. And just as important, for cockpit relaxation the E-32 has almost seven feet...