iii

Does any one have a used Gusher 8 MK III bilge pump? All I need is the rocker arm. Or a used one????

This question is a takeoff from the rudder post/question. I didn’t want to change the subject so I started a new thread. Seth, when in 24-26 knots of wind I had the 3<SUP>rd</SUP> reef in and my 90% jib about 50% rolled up and was still fighting to keep from rounding up into the wind. Loads of...

I just finally purchased a permanent car stereo for the boat. It is a JENSEN VM9312HD. I do not believe in marinized units because they are years behind on features. It is a DVD player with a 7" touchscreen that can act as a second display for my GPS. It plays mp3s from DVD which means I...

Just became owner of a Mk III in Valdez, AK Between the dorads in front of the mast is an unfinished area looks like silicone or something 6 inches by foot and a half (roughly) what is supposed to be there??? thanks

Hi All 1983 [+ or -] 35 MK III owners, I'm new to this site am excited to "talk" to fellow owners who have had some "personal - hands on" mtc. experiance with their boat. Currently, I have three topside projects that need addressing: 1. I need to replace the "portlight" screens and gaskets...

We want to buy a soft, custom mattress for V Berth on an Ericson 35 Mark III. We live in Eugene, Or., but frequently drive to the Seattle area. If in that area, we could pick it up within the next few weeks. Want one that is fairly new, with, or without the dressing seat addition.

We have a 1984 e35 mk III. I think we've tried every combination of cushions to make up the bed using the table settee area. Maybe I've missed something. Some are too big, some too small. Nothing seems to fit over the table top perfectly once it is lowered to the right position. Is there a...

I am a non-owner, looking to acquire one of these great boats. I am upgrading from my Bristol 29, to a boat suitable for cruising with my family of 4 on coastal or island trips. I also want great day-sailing characteristics. I have settled on the E35 as being the best mix of performance and...

Good afternoon. I am trying to decide on the pruchase of a 35 III. The boat is a 1986 and is in good shape other than the following: 1. The deck has moisture aft of the bow pulpit thru deck fittings. Has anyone run into this problem? 2. The dorade box has leaked (a common problem). The deck...

nice e35 fs on e bay this week, fl, looks to be in nice shape... 1886 (i think) mk III, lots of extras and goodies...:nerd:

The manufactures name is no long on the mast of my 1983 35, Mark III. I'm guessing it is Kenyon but can anyone confirm that? Thanks, John Wressell

Being a newbe to these Ericson's, what is the difference between the 2 and 3? I don't see the 2 listed on the spec's & doc's. Thanks,

For Sale by Original Owner ERICSON 32 MK III Year: 1987 (Commissioned December 1986) Hull #718 Price: $55,000 Located: Marina Del Rey, California LOA: 32’ 6” LWL: 25’ 10” Beam: 10’ 10” Draft: 6’ 2” (std. keel) Displacement: 9,800 lbs...

:egrin: 1986 Ericson 35 Mark III. Performance Cruiser. Good condition. Anam Cara spent her first 16 years in fresh water in Lake Michigan. Keel was modified with a bulb manufactured by Mars Keels in Toronto (4'11" draft) prior to relocating to the west coast of Florida. Teak interior...

Asking price of 1986 Ericson 35 III Alibi II (see July 2004 post for specs.) has been reduced to $65,000 OBO. Alibi II is in excellent condition with many upgrades, A/C and new sails. She is a freshwater boat in Texas. For complete specification sheet and photos, respond to this post or call...

:egrin: 1989 Ericson 35 Mark III. Performance Cruiser. Excellent condition. Fin keel. Teak interior, separate head & shower, full galley with 4 burner stove/oven and broiler, H/C pressure water, sleeps 6. Large sail inventory including 2 full sets with 2 gennakers & 1 spinnaker. Full batten...

Alibi II, a 1986 Ericson 35 Mark III, is now (sadly) for sale. She is a freshwater boat (past 9 yrs.) in excellent condition. Summary of features: deep keel, recent custom full batten mainsail and 135% R/F Genoa, Harken furler, whisker pole stored on mast track, rigid vang, Harken ball bearing...

My E 35 III main salon table takes up so much room we usually stow it in the quarterberth until it is needed for dining. I want to make a smaller "cocktail table" to fit on the existing support leg that will not take up as much room, yet provide space for a solo lunch or (better) drink and...

My 1986 ER-35 III Alibi II has a Norcold 110/12 volt wheezing and gasping refrigeration unit with a small L-shaped flat evaporator plate (10x17x12high) in the aft icebox that is not keeping up with our Texas summers (or Fall or Spring for that matter). I am considering replacing the unit with a...

I have a 1986 ER 35 III with the stainless guard over the deck box forward of the mast. the guard is thru bolted with self locking nuts on the underside of the deck and inside the headliner. A small leak has developed, and the water runs inside the headliner and is discoloring the teak cabin...

I recently had a large quantity of 1/2 inch teak-colored T molding made to trim the interior hatches on MK III Eriscons. It's beautiful and it fits. If you'd like to replace that old, cracking original T molding on your Ericson, I'm selling packages of 20 feet (should be enough to handle...

My wife and I take possession of a 1987 E-35, MK III this Friday. Expect wind/waves/cold temperatures in the Northern California locale where we will sail. Thus, thinking about getting a dodger. Does anyone have any recommendations on where to get. No local firms do this type of work, so a...

Does anyone have any views on the advantages or disadvantages of the newer 200 series over the Mark III series? I have a 32-3, which I prefer because it seems better suited for two people, i.e. it does not sacrifice room in the V-berth for a second cabin where the quarter berth is and it...