installed

The marine air 12000 btu unit we had on the boat turned on and the compressor got cold but the blower didn't turn on, replacment blower is 270.00 and we just bought a new unit. We purchased a wabasco 16000 btu unit and I picked it up with a new pump this morning. I got to the boat at 10:30...

Our 30-year old aluminum diesel tank has no access or clean-out hatches. It is an 80 gallon built-in ... literally, it extends under cabinetry and (partial) bulkheads. I can see how to cut access hatches in the teak (plywood) sole and make that work well. What I am much less sure about...

I have installed the displays in place of my DMI instruments. I had to use the flush mounting kits with them to make them fit the old openings as the stock display barely covers the hole. The other nice thing about the flush kit is that it makes the instruments much thinner. Next I need to...

Well, here you all go. I did it, the Dickinson was installed last week and tested just this weekend. The actual stove installation was pretty simple once you figure out where it will fit and cut the hole in the cabin top. That is a bit nerve racking though. I figure the whole thing was...

I just wanted to thank all that helped in my decision to install a transom radar mast on my 1973 E-27. I installed a Furuno 1620 with a Edson mast kit. It took around 10 hours for the installation because there were a couple of parts that needed to be fabricated.

Has anyone installed a radar on a 1973 (or there abouts) E-27. I have been told I would have to step the mast at great expense, so now I am looking into putting a radar mast on the transom. Please advise with pros & cons. Also interested in where to put the screen. I have a Furuno 1622 with...