rebed

  1. D

    1987 E-38 Keel

    Hey guys! We are in the midst of a refit and are going to launch sometime next week. Since we've been on the hard for six months, we've noticed some rusty water weeping out of our keel/hull joint. While I would love to pull/rebed the keel, the yard we are at doesn't generally do this type of...
  2. F

    How to remove anchor locker, rebed bow fittings?

    Hi, I want to rebed the bow pulpit and cleats, and can't really get at them from the underside due to the anchor locker being in the way. There is very little space between the anchor locker and the hull to get my hand and a wrench in there to the underside of the deck. I am thinking it...
  3. D

    While the mast is stepped for the keel rebed ...

    I thought I would paint the mast. I wasn't very sucessful on a search. help please.
  4. Loren Beach

    Keel Rebed article

    http://www.wbryant.com/StellaBoat/hauls/0811/index.htm Link to a newer project page on Wally's fine site. Lots of photos and commentary on rebedding the keel. Loren
  5. G

    Ericson 27 - remove, clean and re-bed portlights

    Dear All, I am a proud owner of a great 79 Ericson 27. I do have to re-bed the port lights and I am thinking about to put new frames in. I do have two questions to the forum (i) any ideas and experience on cleaning and re-bedding port lights and (ii) any suggestions/resources where to...
  6. simdim

    Epoxy to re-bed handrails

    Folks, I had discovered that under heavy rain my e29 leaks from under handrails. It leaks a bit from main cabin portholes - but handrails need to be tackled first. It seems like PO did not do a good job reattaching them after refinish. Now I need to re-bed but want to take a quick poll on what...
  7. Dferr

    My Turn for the Keel Drop

    After reading all of the posts of RT's keel drop, I was dreading this, fearing it would be the worst. I went down last week to build the frame around the keel, as RT did. We went down today. The travel lift was in place. They lifted her up about 2" and the keel didn't move. I was...
  8. Sven

    Grabrail; remove, refinish and rebed

    La Petite's grabrails (on deck) need some attention. We plan to strip them of the flaking varnish and go with teak oil. I'd like to re-bed them at the same time to start the incremental re-bedding process for all the deck hardware. Two questions. 1/ Are the acorn nuts on the inside of...
Top