Ever since we got our E32-3 there has been a salt water leak past the rudder post stuffing box. Lots of salt crystals in the boat. After the last haulout I pumped a ton of grease into the cavity between the rudder post lower bushing and stuffing box. To my pleasant surprise no more leak. The hard part was drilling a hole and installing a new Zerc fitting (the factory zerc was corroded beyond use) to be able to pump in the grease. And of course making sure the new Zerc was above the water level and not drilling into the bushing etc. The photo shows where I put the new Zerc fitting. Nice easy fix.