• Untitled Document

    Join us on March 29rd, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    March Meeting Info

    (dismiss this notice by hitting 'X', upper right)

Fender Tender vs. Fixed Bumpers

Christian Williams

E381 - Los Angeles
Senior Moderator
Blogs Author
When I lived with pilings fender boards were common, often beautifully varnished with names cut in. They could be hung as needed to fend off pilings and tide rise.

Now I see WM makes it easy to build one.

fender boards.JPG
 

Tin Kicker

Sustaining Member
Moderator
When I lived with pilings fender boards were common, often beautifully varnished with names cut in. They could be hung as needed to fend off pilings and tide rise.

Now I see WM makes it easy to build one.

View attachment 46393
I saw those and considered them. They look prettier but what I came up with is easier on/off, won't shred, stows easier, and iirc the 25 ft roll of used fire hose cost me something like $20.
 

jtsai

Member III
Ask your local fire station for retired fire hose. I got a bundle few years ago and have benefited many sailors
.
 

Christian Williams

E381 - Los Angeles
Senior Moderator
Blogs Author
Update to fixed fenders:

The HugR fixed fenders are well made and attractive, but they have a voice. A vinyl "scrunch" when the boat compresses them (there's only 8" clearance on either side in my slip). I found the periodic sound distracting, so I returned to also using hanging fenders--with new high-class covers. The hanging fenders absorb most of the normal movement, keeping the vinyl quiet. Since I leave hanging fenders on the dock when departing, the fixed fenders are still available when returning to the slip.

I was interested to be reminded (posts above) of the pressure on lifelines from hanging fenders there, rather than simply cleating the fender off. But the forces in my environment--a protected slip--aren't great, and I concluded there is no issue for me. Recent guests have raved about the "simplicity" of such attachment, meaning that they don't have to puzzle over how to cleat a line, or judge fender height above water. And I don't suddenly become Capt. Bligh.

hanging and fixed fender.JPG
 

Mark F

Contributing Partner
Blogs Author
The HugR fixed fenders are well made and attractive, but they have a voice. A vinyl "scrunch" when the boat compresses them (there's only 8" clearance on either side in my slip).
I don't know if you are referring to the rubbing/skidding sound of the vinyl fender but I have found squirting some dish detergent onto the fender where it meets the hull can quiet things down. Also squeaking dock lines can be quieted down with dish detergent. I used to use dry lube but it didn't seem to be as effective and is more expensive :)
 

Loren Beach

O34 - Portland, OR
Senior Moderator
Blogs Author
Or "pad" the fixed fender with an inexpensive terrycloth towel as we have done. Yeah, they can squeak otherwise...
 

windblown

Member III
I may have been misinformed, but many years ago I read or had someone tell me that I shouldn't hang fenders from the lifelines. I don't recall what the reasoning was, but it stuck with me. Ever since then I have temporarily hung the fenders from the lifelines when arriving back at dock because its easy to get them into position that way, but then re-tied them to stanchions or the toe rail cleat or the rail itself where it crosses the scupper opening when leaving the boat. I side tie the boat and the bumpers are nearly constantly under pressure. But why not use the lifelines? Any drawbacks? It would be so much easier.

Grant's idea is a great one too. I once found a fender line draped across the front of the PSS shaft seal. A few inches further forward and it could have been caught up in the coupler and turned into a bad situation. I now tie them all off in the lazarette.
My fenders go in the anchor locker.
 

acubria

Member II
Our club is always figuring out stuff on a shoestring and this is what you can do with some old NYFD hose. One of our members is a retired fireman, so that makes things a bit easier. The hoses are made of a very durable material that will not surprisingly last longer than the old dock ...:p:p. I use fenders regardless when I come near this dock.
 

Attachments

  • Screen Shot 2023-04-15 at 4.48.44 PM.png
    Screen Shot 2023-04-15 at 4.48.44 PM.png
    1.2 MB · Views: 5
  • Screen Shot 2023-04-15 at 4.54.45 PM.png
    Screen Shot 2023-04-15 at 4.54.45 PM.png
    1.1 MB · Views: 5
  • Screen Shot 2023-04-15 at 4.55.33 PM.png
    Screen Shot 2023-04-15 at 4.55.33 PM.png
    1 MB · Views: 5
Top