• Untitled Document

    Join us on March 28th, 7pm EDT

    for the CBEC Virtual Meeting

    EY.o March Zoom Meeting

    All EYO members and followers are welcome to join the fun and get to know the people you've met online!

    See the link below for login credentials and join us!

    March Meeting Info

    (dismiss this notice by hitting 'X', upper right)

E29 stanchions post wood block

skylosier

New Member
I have a 1978 E29 and for some reason the two stanchion posts by the entry points on both sides have wooden blocks under them, where as all the other ones have the fibreglass moulded directly to fit.

Does anyone know where to get a replacement for these blocks? One of mine has rotted out and is now causing a leak.
 

toddster

Curator of Broken Parts
Blogs Author
No such thing on my 71. Did someone install after-market gates that weren't quite the same height as the rest?
 

Christian Williams

E381 - Los Angeles
Senior Moderator
Blogs Author
Welcome aboard the forum. Got a cell phone photo of the situation? They're easy to include.

As you dive into this, there may be some saturation of the deck caused by the leakage. Members can advise on fixing that.
 

skylosier

New Member
Picture of the wooden block under the stanchion, and then a picture of the other one with the fibreglass mould for reference.
IMG_1157.jpg

IMG_1158.jpg
 

Loren Beach

O34 - Portland, OR
Senior Moderator
Blogs Author
My guess is that someone wanted an additional stanchion, sometimes to add a gate. The original deck mold had raised places in he tooling to let the stanchions stand up proud of the deck surface and this would allow an angle, or eliminate an angle to the attachment to the deck. Duplicating the factory raised base required an angled piece of material, and someone chose teak. Teak would have been a common choice at the time.
Nowadays we would use G10 or one of he denser plastic products. Mill it to shape. Or... make a perfect wedge with a 3D printer.
Since it's long past time to re--bed your stanchions anyway, best just remove them and re-bed them all. Prolly also good to add some G10 backing plates underneath while you are at it. I just hope that the coring has not suffered from water intrusion.

Edit: the sloped spacers I added under our stanchions are pictured in this earlier thread. https://ericsonyachts.org/ie/threads/stanchion-bracing.3371/#post-18646
 
Last edited:
Top