EricsonYachts.org has opened the season for raising funds to support the expenses of the site. If you would like to participate, please see the link below for additional information.
Thanks so much for your continued support of EricsonYachts.org!
Parting out a 1988 Ericson 28’ in Southern Maine
New Main sail
Interior cushions (immaculate upholstery)
Universal M12 (runs great)
Richie Compass
Boom
Mast
Standing rigging
Winches
Lewmar hatches
Alcohol stove
Interior components like dining table
Water tank
Both electrical panels
120 Genoa...
Many of the original Ericson 38 layout boats seem to have a solid fuel stove on the forward starboard bulkhead. What are your experiences with these stoves? How well do they work?
Thanks!
Dave
My lack of forum participation of late has been due to lack of spare time for being in front of a computer.
I have been working on projects inside Silver Maiden while putting up with such cold that my little electric heater and 3 heat lamps only get the main cabin up to about 50 with the vberth...
I replaced an old 1990s(?) vintage Xintex S-2 propane system with the latest (2019) Xintex FIREBOY SYSTEMS P-1BS-R Propane Detector w/Sensor & Valve (single sensor) system. The reason for working on the system was that the propane solenoid valve located at the tank in the cockpit locker had...
Hi there
I have a 1984 E 26 and am looking to replace a 6 foot section of the aluminum rubrail. Does anyone know where to source this material?
I am also looking to replace the stove as it is absent. Looking for a drop in unit does anyone know what stove was in this boat?
Thanks for any insight
Someone replaced the original stove and oven (probably propane) with a small fridge. I don't really like the fridge, but probably would hate the original stove worse...lol. I really like the new Origo Alcohol stove/ovens but don't want to fall into the trap of spending more on my boat than I...
I have a 30+ and was wondering if anyone has built a countertop to sit on top of the stove while not in use. As we all know, space is at a premium and having that extra counter surface when not using the stove, which is more often than not, would be helpful.
Any pictures on ideas would be...
Does anybody recognize this as a Homestrand Stove? I’m guessing, because they were the original manufacturer. The front knob is missing, and I’m thinking it’s for the pump stem (?). I have no idea if it will hold pressure.
The stove looks like it could be used again, or is there a better...
We have not used the two burner stove for over two years but now with a 7 day cruise coming up we need hot food.
Filled up the tank and the gauge says 150 but NO gas to burners and will not light. is there a cut off some where?
There is a round 4" across pressure thing I guess about 5" into...
I have the origional 3 burner w/ oven alcohol stove aboard my 1976 E36C.
I need to either convert the burners to propane or replace them with new alcohol ones.
My problem is that the current burners are cast steel worn and dont burn clean. Because they do not burn clean,they soot up the...
We will be replacing the CNG stove with either an Origo or a Wallas stove.
The stove actually works quite well, if you don't mind hauling tanks around.
I suspect it is original equipment and wonder if it is worth hauling it to Minnie's. What about the two gas tubes ? The tubes are...
Hi,
I recently bought a 78 ericson 27,, which I'm really enjoying. It came with a kenyon alcohol stove. I'm trying to get it to work to no avail. Any suggestions on troubleshooting this, Or should I scrape it and get something else?
I'm looking to replace the old princess alcohol stove oven in my E39. It has never been set up to use propane.
I saw a new-design Wallas Safeflame diesel stove from ScanMarine (in Seattle). They have several designs, and some have a blower kit that turns the stove into a cabin heater.
It...
I've been looking for a new stove for our E39 and have an opportunity to buy (for next to nothing) a 2-year old Force 10 stainless steel stove/oven that was on a boat that sank in the slip. The stove was supposedly underwater for 4 hours.
Does anyone know what would need to be addressed with...
My E38 has a Regal 4 burner CNG stove with oven. I need to convert to propane before heading off shore but I can't find any information on a Regal. The company is Regal Gas Systems, Inc.
Anyone know anything about Regal stoves?
Kind of a longshot, but I'm looking for any working burners, and in particular, control knobs w/rods for my old Galleymaid alcohol stove. If anyone has recently upgraded to propane and has an unused stove, or knows of a consignment store with parts, please let me know. Thanks.
This weekend, while on board our E32-3, my wife and I were discussing some of the "winter" projects I might be taking on for our boat. One of them is to replace the old two-burner/oven propane stove. This is the second year for our "new" old boat (1987) and the oven never worked along with the...
We have just enjoyed a great lasagna with garlic toast, followed by homemade "oatmeal and raisin" cookies, all courtesy of our brand new Force 10 propane stove. After years of living with the old Galley Maid kerosene stove and its bad habits (burners that refused to be rebuilt effectively...
Hi All,
The valves on our Princess stove are becoming problematic (1986 E35). Most of the time they work just fine, then all of a sudden you can't turn them at all - often when the burner is on - my wife will call me to fix it & I sometimes have to play with it for 2 or 3 minutes to get it...
I have a Princess pressurized alcohol stove in my 76 E27. I removed it to get access to run some wires and noticed that there were two wires coming out of the back of the unit. Anyone know what these are for?
Thanks, Mark
Since I do not seem to be able to find this tank anywhere online, I am wondering if they are still made. Can anyone offer a suggestion.
Thanks,
David
E35-II QuoVadis
New Orleans, LA
I am looking to sell my Galley Maid alcohol dual burner stove and oven. It's stainless and has the window on the oven door. All hardware, gimballs, etc. included. Also have tank but no pump.
Functional to my knowledge and clean. If anyone is interested make a reasonable offer. Wanted to see...
We have an ancient Homestrand/Kenyon model 206 alcohol stove in our 1971 E29 (#129) on Lake Superior. We have been very happy with it. It works great, but needs a new check valve. This valve sits at the bottom of the fuel inlet cyclinder, and requires a special wrench to get it out. The...
I have a 20 year old pressurized alchohol 2 burner stove on my '73 E27. I think it's a Princess and it's recessed in the counter. It's gone unused for many years and needs a rebuild (of at least the pump) to work.
Any input on rebuilding or a replacement would be welcomed. I probably only...
My boat came with an alcohol stove, and it was surrounded by a thin sheet of stainless steel.
Is it necessary to leave it in there for a propane stove, or is it just there to catch burning dripping alcohol before it sets fire to the plywood?
Gareth
Freyja E35 #241 1972
Anyone know where to get these? I have an 89 E 38-200. I don't recall right now the stove manufacturer, I'll look tonight. I was hoping to not have to replace the whole stove. I know I will need some valves for the stove, a tank, boat already has the locker, new lines, and a solenoid. What else...
hello, I recently purchased an Ericson 29, 1979. I am trying to find a replacment gimbled alcohol stove. Where can I purchase one or find a replacemnt......?
Thanks
Randy
I have a 1985 Ericson 30+ with a galley stove that two burner with oven pressure kerosene stove. The tank is rusted out stove has not be use in 5 or 6 years what should I do? Can I get a tank for the kerosene stove? should I replace the stove with a propane stove? what size stove? where do I...