• Untitled Document

    Join us on November 22nd, 7pm EDT

    for the CBEC Virtual Meeting

    Adventures & Follies

    All EYO members and followers are welcome to join the fun and get to know the people you've met online!

    See the link below for login credentials and join us!

    November Meeting Info

    (dismiss this notice by hitting 'X', upper right)

table

  1. yalcin

    Main table tightening knob

    I think we have a missing knob in our main table, I was wondering what the missing piece looks like and if we can source or make it. The top wobbles and rotates freely, the bottom knob and the fitting is solid. The brand sticker says Zwaardvis but it doesn't look like the current models.
  2. P

    How to convert salon table to bed ? E34-2

    Hello, I am wondering how to convert the salon table to a bed on an 87 e34-2. Thanks. Phil
  3. gkjtexoma

    Wanted Ericson 30+ Dining Table

    Hello all, By chance is there anyone with a spare table for an Ericson 30+. I'll pay good money and shipping for one in decent shape. Or even if there is one out there in not so good shape, it would be better than starting from scratch. Thanks! :esad:
  4. C

    Ericson 30-2 folding table needed

    I recently purchased an 1979 Ericson 30-2. The main teak table is missing its fold-out extension. The table is the kind that folds back up against the cabin bulkhead. I will probably have to mill/build a new one but just in case, I thought I would ask here if anybody had such an extension (or...
  5. S

    WTB, Table extension for cabin table. The fold down part on a 1986 38-200.

    My Table extension is missing and we are a family of 6 Needed is that fold down leaf in the cabin . Ant racers out there that has theirs in the garage just taking up space? Thanks, sailorbuz@hotmail.com
  6. Sven

    E39 B salon table, per Lew Decker

    On the very off chance that someone can take advantage of it ... As we are in the middle of selling our house and equipping Senta II for blue water we have no spare time at all, but if someone would like to pick up or arrange for pick-up of the table top it is a cargo-shift, no cost...
  7. Sven

    Salon table progress

    We're making some progress with the new salon table. The old one (built by Lew) is beautifully finished to the original design specs but it doesn't seat 4 well and we need all the extra storage we can get so a new settee/bench seat will come in handy. After all this work I hope it will...
  8. Mark F

    E27 table

    I posted some photos for Stuart (Stargazer) in a folder in the Community area. Does anyone know how to organize the order of photos in the albums? They are in no particular order. Loren, Sean? Thanks
  9. D

    WTB teak trim outside corners

    Aloha, I want to buy two teak 90 degree outside corners (trim) for my '79 E-35. I think the radius is about 1.5 inches (for the chart table and the sink counter edges). If you have any for sale, or know a supplier please email me at: dcapn@hotmail.com
  10. Kringe

    dropleaf table on E25

    Can anyone show pictures of their dropleaf table or have plans on how to construct a new one? I simply do not have a table on the interior of my boat and would like to have one of the fold up types. Would it be fairly easy to construct one?
  11. D

    38 kid's table

    The kid's table (ok, game table) on our early 38 is tippy and difficult for those not used to eating off of it to keep in its brackets. While we have two L shaped brackets that drop into receiving brackets and a drop down support that rests against the wall, it appears that later 38s have a...
  12. Gary Peterson

    Cockpit Table using Starboard(tm) material

    I would like to show some pictures of the drink holder and cockpit table we made for our 381. We used 1/2 inch thick Starboard(tm) because it is impervious to the marine enviroment. There are two winch handle holders made out of Starboard(tm) on the pedestal legs also. No holes were drilled...
  13. P

    Need hardware to attach folding table to pedestal

    Greetings, I have a 1981 E 28+ with pedestal steering. I found a nice teak table top ( 13"x 24") that would make a great folding cockpit table if I could find the hardware ( hinges) to attach it to the stainless tubes of the pedestal and a locking arm to hold it in the opened up position...
  14. Loren Beach

    vacuum table?

    I know a boatbuilder that uses one for all sorts of fabrication -- small layups and sometimes even rather large pieces. Anyone here built one? For years I always have some difficulty getting the excess epoxy out of parts I am laminating... This is normally layers of cloth and resin over a mold...
  15. M

    Need a table pedestal

    Can anyone help me figure out where to go for an adjustable table pedestal, of the kind found in E34's and some E32's? Thanks for any lead you may have on this. Mike
  16. S

    Pedestal for Table 1976 E 32

    Hi all, I have a 1976 32. I am looking to replace the pedestal, base on cabin floor and on the bottom of the table. The 'T' handles that were used to tighten the pedestal became stripped. I am looking to either replace the 'sockets' and pedestal, or get an extending tube that I can use. The...
  17. SASSY

    1987 E 34 Salon Table

    Does any one with a 1987 E34 have a salon table that converts into a berth? Mine does not but I realy wish it did. If you do please send me some pictures, or a description, I would greatly apreciate it. I have done some extesive maintenance and upgrades on Sassy. If you need any help on an...
  18. mherrcat

    Type of wood in E30+ dining table.

    What type of wood is the dining table in the E30+ made of? There is solid wood edging around all four sides of a larger center piece. Is the center piece solid or plywood? I need to re-attach the mounting plate and will have to drill out and plug the old screw holes first.
  19. J

    Dinette Table question on my E-27

    I have owned my 1972 E 27 for 4 years now. I was doing some work on the boat last weekend, had my camera on board and decided it was time to ask. This may be dumb.. but... The dinette table has an approx 3 inch folding 'extension' attached to the main table. It is made of the same material and...
  20. B

    1974 E-32 dinette table, etc.

    I am looking for a dinette table (less base), a set of interior cushions and a mainsail & jib, all in good condition. Bill Beatty, Upland, CA bilcan1@verizon.net
  21. Loren Beach

    Cockpit Table [Master Thread]

    Cockpit Table success story: I thought others might want to view the really *cool* Ericson-built table that I recently bought from another EY.org site member. The top and fiddle joinery is identical to the construction of our dining table, so I assume that this circa-1990 table came from the...
  22. G

    e-29 table repair

    My cabin table has fallen on pieces. I do not care much because I did not like it from very beginning. Any existing projects for replacement or I just have to take table pieces to a good carpenter to take measurements and chose teak or mahogany? How much could it cost?
  23. S

    E 28+ table

    I have a 1985 28+. I am trying to purchase a pedestal table. So far all the tables I have found are too big for the cockpit. Does anyone have any ideas or would be willing to share design plans if they made one? Thanks Lynne:esad:
  24. N

    E32-3 Dinette Table Lift Strut

    Well here is one I’m happy with. And the whole project only cost me $25. With 86 of the 109 things on my E32-3 to do list Done I am getting to many of what I call “Optional Upgrades”. The fun stuff. Now we found the Dinette table awkward to lower and raise which we do a lot when cruising. So I...
  25. N

    Table support 38-200

    I purchased a Ericson 38-200 that was damaged by Katrina. When I purchased it the yard had removed the mast. Being unaware at the time of purchase that the dining table was attached to the mast with some sort of bracket I did not realize I until now that I do not have this bracket. I have...
  26. Sven

    The folding cockpit/cabin table project

    We got the table almost done in time for the 4th. We didn't fill the screw holes yet, the varnishing is far from done, and one leg is about 1/8th too short, but it was done enough to take out. The pictures from the project are posted at...
  27. Sven

    Table (or chair) tie-downs

    Another item on my to-do list is a small folding table that we can use in the cockpit or down below. I have the design all worked out, actually copied the table design concept from my parents' sloop from the 60s. Now I just have to build it. As the table will be used both in the cockpit and...
  28. P

    Wanted - E-27 Head Door and Table

    As some of you know, when I bought my 1972 E27, it did not have the dinette table or the head door. If anyone out there has a spare they'd consider selling me, I'm all ears. Very tight budget, though. I'll likely build my own but if there's one lying around....... Thanks...
  29. Sven

    Perco table fitting ?

    Does anyone here know what the Perco SS brackets below mate with ? I assume that it is something that attaches to a table ? Are there two because two are needed or to allow the table to be deployed but moved out of the way by a foot ? This is down below in an E23 - MK II. Thanks for any...
  30. S

    Wanted - Table Pedestal for Dinette 1976 E 32

    I am looking for a new/used pedestal for my dinette table for my 1976 32. I am looking specifically the mounts that bolt/screw to the cabin sole and the underside of the table. My existing mount is stripped where the T-bolt threads into the mount on the sole. I have had to drill it out and...
  31. H

    E35-2 cockpit table

    Has anyone got some pictures or drawings of a good cockpit table design for a 35-2. It will have to be easily installed and removed due to the traveller location on these boats. Thanks for any help. Pat Lion's Den E35-2
  32. L

    table pedestal - E39B

    Hi - Anyone out there know where I might find the aluminum tubing for the table pedestals on an E39B? I have both of the original pedestal bases and one section of tubing - 3 1/4" ID - I'd like to match it but haven't had any luck - Thanks for the help -----Lew in San Diego
  33. J

    E 35 III Main Salon Table

    My E 35 III main salon table takes up so much room we usually stow it in the quarterberth until it is needed for dining. I want to make a smaller "cocktail table" to fit on the existing support leg that will not take up as much room, yet provide space for a solo lunch or (better) drink and...
  34. Sven

    E23 table for main cabin ?

    So far I haven't seen a single picture of the optional table offered for the E23. I'm guessing that you hang it off the two metal brackets on the bulkhead (to port) when you don't use it ? Is the same table usable in the cockpit at anchor ? Does anyone happen to have blueprints for the...
  35. I

    Cabin Table for E27

    Does anyone have any plans or ideas for a removable table to install in the cabin?
  36. P

    Wind Vane, Speed Impeller, Engine work and getting the table post loose

    As you can tell from the list of items in the subject line I'm tackling a range of issues. I'm the new and proud owner of Galileo, an Ericson 35-3. She's currently on the hard and I'd like to take care of a few things before I launch her (I know, it's mid October, but I just bought it!)...
Top