For Sale Yanmar 2GMF20 & E-30 Parts

[Ericsean]

I have a used Yanmar 2GM20, Fresh water cooled engine. Bought it to install in my 1970 E-30, but bought an E-38 instead. Now parting out the E-30, so the engine is for sale. along with 4 Yanmar motor mounts and Yanmar Panel.
$2,500 for all. I will throw in 3/4" steel plates I had fabricated that will mount to old A-4 motor mount spacing, and accept the new Yanmar Motor mounts. Located in Babylon, NY. Would prefer pick-up.

Also have 18gal plastic Tempo Fuel Tank, which has been cleaned and will accept diesel fuel. $75.

Martec Folding prop, 12 x 6 (too small for Yanmar) $100

Edson Pedestal Steering complete w/ all sheaves and quadrant and wheel, $500.

Mast and Rigging $300.

Lifeline Stanchions, complete w/ wire 200 (relatively new top wire) or 25/each

Windows 25 each for large, 10 each for small (all fixed)

Raymarine 40 series depth/speed combo w/ transducer - $100

Barlow 16 two speed winches, pair $150

Barlow #10 single speed winches pair $75

3/4 oz tri-radial spin, red/white panels on bottom, solid blue w/white stars on top $400. (One panel repaired and slightly different blue color) some color bleeding.

Doyle Stac-pack main w/ 3/4lehtght tapered battens $200.

North Mylar 150, triradial $100 (has a few light air races left in it)

Shore asym off a Mariner 28, radial head, red white & blue, very crisp, limited use, $400.

 

[Frank Langer]

Hi Kevin,

I am interested in the Raymarine 40 series speed/depth/transducer. Can you confirm that it still works properly? Can you ship it to British Columbia, Canada?
Please email me at: franklanger@live.ca.

Thx.
Frank

 

[exoduse35]

i am interested in the #10s, Edd exoduse35@yahoo.com

 

[boethius27]

Hi, can you shoot me an email about the Doyle Stac pac? Thanks.

justin@jigsawindexing.com

 

[Lucky Dog]

I would be interested in the Barlow 16 two speed winches, pair $150

and the Martec Folding prop, 12 x 6 (too small for Yanmar) $100


ml

 

[VolvoEricson]

I would be interested in 2 of the small fixed windows. Rob Hessenius
rhessenius@hotmail.com

 

[Lucky Dog]

Where in Wisconsin are you?

ml

 

[Lucky Dog]

Kevin,

Is the prop still available?

scuppers@dishmail.net

ml

 

[exoduse35]

I am also interested in one of the small windows, Edd

 

[ref_123]

Asymmetrical?

Hi Kevin,

what are the dimensions on the assymmetrical spinnaker and is it still available?

Thanks,
Stan

 

[DavidWms]

E-30 inventory?

Hi. Do you still have some of the parts available?

 

[Ericsean]

Parts

I could never bring myself to cut up the boat.

I guess if someone had bought the Yanmar, it would have made it easier for me to part out the boat.

Thinking of installing the engine, and putting in the water to enable me to sell the whole package.

 

[tmcmillan99]

Yanmar 2GM20

Hi I am interested in buying the Yanmar 2GM 20 and the fuel tank.
Can you send me an e-mail with details of the engine and location for pick-up.
Regards,
Terry
tmcmillan99@yahoo.com

I have a used Yanmar 2GM20, Fresh water cooled engine. Bought it to install in my 1970 E-30, but bought an E-38 instead. Now parting out the E-30, so the engine is for sale. along with 4 Yanmar motor mounts and Yanmar Panel.
$2,500 for all. I will throw in 3/4" steel plates I had fabricated that will mount to old A-4 motor mount spacing, and accept the new Yanmar Motor mounts. Located in Babylon, NY. Would prefer pick-up.

Also have 18gal plastic Tempo Fuel Tank, which has been cleaned and will accept diesel fuel. $75.
& blue, very crisp, limited use, $400.

 

[Pater]

Have cash and need the engine

I'm in the market for a2GMF20 engine. I'm in Nesconset and my boat is waiting on the hard for a repower.please contact me ASAP.
Thanks,
Pater

I have a used Yanmar 2GM20, Fresh water cooled engine. Bought it to install in my 1970 E-30, but bought an E-38 instead. Now parting out the E-30, so the engine is for sale. along with 4 Yanmar motor mounts and Yanmar Panel.
$2,500 for all. I will throw in 3/4" steel plates I had fabricated that will mount to old A-4 motor mount spacing, and accept the new Yanmar Motor mounts. Located in Babylon, NY. Would prefer pick-up.

Also have 18gal plastic Tempo Fuel Tank, which has been cleaned and will accept diesel fuel. $75.

Martec Folding prop, 12 x 6 (too small for Yanmar) $100

Edson Pedestal Steering complete w/ all sheaves and quadrant and wheel, $500.

Mast and Rigging $300.

Lifeline Stanchions, complete w/ wire 200 (relatively new top wire) or 25/each

Windows 25 each for large, 10 each for small (all fixed)

Raymarine 40 series depth/speed combo w/ transducer - $100

Barlow 16 two speed winches, pair $150

Barlow #10 single speed winches pair $75

3/4 oz tri-radial spin, red/white panels on bottom, solid blue w/white stars on top $400. (One panel repaired and slightly different blue color) some color bleeding.

Doyle Stac-pack main w/ 3/4lehtght tapered battens $200.

North Mylar 150, triradial $100 (has a few light air races left in it)

Shore asym off a Mariner 28, radial head, red white & blue, very crisp, limited use, $400.

 

[Pater]

Hope the engine is still available

I have a used Yanmar 2GM20, Fresh water cooled engine. Bought it to install in my 1970 E-30, but bought an E-38 instead. Now parting out the E-30, so the engine is for sale. along with 4 Yanmar motor mounts and Yanmar Panel.
$2,500 for all. I will throw in 3/4" steel plates I had fabricated that will mount to old A-4 motor mount spacing, and accept the new Yanmar Motor mounts. Located in Babylon, NY. Would prefer pick-up.

Also have 18gal plastic Tempo Fuel Tank, which has been cleaned and will accept diesel fuel. $75.

Martec Folding prop, 12 x 6 (too small for Yanmar) $100

Edson Pedestal Steering complete w/ all sheaves and quadrant and wheel, $500.

Mast and Rigging $300.

Lifeline Stanchions, complete w/ wire 200 (relatively new top wire) or 25/each

Windows 25 each for large, 10 each for small (all fixed)

Raymarine 40 series depth/speed combo w/ transducer - $100

Barlow 16 two speed winches, pair $150

Barlow #10 single speed winches pair $75

3/4 oz tri-radial spin, red/white panels on bottom, solid blue w/white stars on top $400. (One panel repaired and slightly different blue color) some color bleeding.

Doyle Stac-pack main w/ 3/4lehtght tapered battens $200.

North Mylar 150, triradial $100 (has a few light air races left in it)

Shore asym off a Mariner 28, radial head, red white & blue, very crisp, limited use, $400.

I'm interested in the engine and the mounting plates as well.
Thanks,
Pater

My Email address is PJPC 2000@aol.com,

 

[Loren Beach]

The OP (original poster) has not checked in here for quite a few months. If you click on his screen name, there is an option to send an email to him directly.