EricsonYachts.org has opened the season for raising funds to support the expenses of the site. If you would like to participate, please see the link below for additional information.
Thanks so much for your continued support of EricsonYachts.org!
I went to see an Ericson 27 on the hard with the mast stepped so I could see inside and out but not the entire mast or rigging fwiw. I took some pictures of things I was concerned with but don't know how big of a deal they are. Any feedback/thoughts appreciated.
The first thing I noticed...
LOWERED PRICE on a great boat...
1973 E27 For Sale, Deltaville, VA
Boat is currently in the water and ready to sail.
Solid hull, no blisters, excellent shape.
New bottom paint 09.
New boot stripe painted in 09.
New zincs in 09.
Atomic 4 inboard engine, tuned up and runs great.
Two...
Howdy all,
This is my first post, so please bear with me! I just purchased a '73 Ericson 27 ... to put it mildly, some areas have lots of "deferred maintenance." The hull, rigging, interior, and outboard were all fine (had it surveyed), but there are a few items that need some help (I got...
1973 E27 For Sale, Deltaville, VA
Boat is currently in the water and ready to sail.
Solid hull, no blisters, excellent shape.
New bottom paint 09.
New boot stripe painted in 09.
New zincs in 09.
Atomic 4 inboard engine, tuned up and runs great.
Two recent marine batteries
Solar Panel with...
Howdy,
I am considering buying a 1973 E 25 cb and am wondering if any of you have any words of caution/advice? I sail in Little Egg Harbor, NJ, and so need a shallow draft boat, but my wife gave birth to twins in November (my son is helping me type this) and so I am looking to upgrade from my...
She in St Petersburg, FL and ready to sail!
I have put lots of $ into her. Took great care of her and had lots of great days of sailing on her. I am sad to let her go but I have upgraded to a larger and older boat and want to find someone who will care for her and enjoy her as I have. She...
Nice Ericson 27 for sale.
Boat is currently out of water in Deltaville.
Solid hull, no blisters, excellent shape.
New bottom paint will be applied in Feb.
New boot stripe painted in Feb.
New zincs in Feb.
Boat scheduled to go back into water on 3/1/08.
Atomic 4 inboard engine, tuned...
Just purchased a 27' 1973 in wonderful condition, except the cabinway hatch cover is a mush of old plywood. Does anyone have the specs or a replacement design to make a new hatch ????? Any ideas would be appreciated. :esad:
Don't see a way to delete posts. Thanks to everyone who expressed interest in our boat. It now has a new owner.
1973 Ericson 35-2 No. 288 located in Long Beach, CA.
* Wheel steering (also has tiller and tiller head assembly)
* Navico autopilot
* Atomic Four auxiliary
* Pressure water system
*...
Ol’ Blue is for sale. I am interested in a larger boat because I am going to be living aboard part time. So I am offering Ol Blue, a 1973 27’ Ericson sloop, Hull #428. She is in the water ready to sail at Cobb Island, Maryland (on the Potomac River). I am asking $12,000. I can be reached at...
For sale, 1973 Ericson 25, keel/centerboard sloop.
RF Genny, Main, porta-potty in separate head, a lot of ground tackle.
Some piling rash (see photos) needs rubrails and paint.
$3500 w/o motor, $5500 w/2 1/2 year old Honda 8hp, long shaft, Elec. Strt.
(negotiable)
Call Brian Lowman @...
I pulled my fuel tank and took it to a local "tank shop" for a new one. They LOST the tank. $%^&*((
I took approx dimensions of the exterior, but not location of the filler opening.
I looked at the docs in the Specs/Docs section and none for the fuel tank.
Anyone got a drawing?
If...
Hmmm, I have just found out via the Ericson Library website that my 1973, 25 Ericson has a beam of 5 feet. Pretty narrow for a 25 footer and it sure seems a lot wider than that. I have seen various documents at this site and others that list the beam anywhere from 5' to 9.5'.
I am in the...
I have a 1973 E-27 for sale, freshwater boat, good condition. I am the second owner, and I crewed for the first owner. Spinnaker equipped, tiller, smooth running 87 Merc OB. Sails are in excellent shape, all 5-10 years old. Diax main and 163% Genoa #1, Dacron/Kevlar 135% headsail(oldest sail)...
I'm having a lot of problems with either rust or varnish in my original 15 gallon steel tank. I've decided to replace it for greater confidence on trips.
The tank is 10" high X 16" wide X 24" long and located between the engine and rudder post. The long dimension is across the boat...
I'm thinking about getting a light weight Fortress anchor as a present to my back. Their FX-7 (4 lbs) units says for up to a 27 footer. The FX-11 (7 lbs) for 28 to 32 feet. I think the E27 is probably heavier than a lot of 27 footers, so I'm wondering if I should go for the larger size...
I've just acquired a 1973 E27. There is a crack in the ceiling on the starboard side in two places. On the outside of the head and on the inside of the head - two separate supports for the deck.
Attached are photos showing the water stains dripping on either side of the wall between the...
Can anyone recommend a good tiller minder for my 1973 E-27? I am still fighting the tiller on long windless crossings under power to the Channel Islands. Makes it hard to enjoy the crossing. I'm not looking for a auto pilot, just something to secure the rudder as on wheel steering models. I...
:egrin:
Hi gang-
Just thought you guys might want to see the "before" pictures of my girl. Like any 30 year old woman, she needs some attention from the local marine cosmetic surgeon (me).
She's out of the water for her bottom job, and while I'm at it I'm going to paint her hull pure...
I am selling my Ericson 35-2. It has a Yanmar 2GM20FC diesel w/ 1000hrs, Shaeffer RF, ST 1000 AP, DS, Main, 2 genoas, staysail and spinnaker w/ hardware, bronze thru-hulls and seacocks. It has backing blocks under enlarged bow cleats, bow and stern rails and stock stern cleats; a bow roller...
I recently hauled the boat and replaced the plastic bushing around the rudder post, installed a new prop, but now the tiller pulls pretty hard to port. Any ideas on how to correct this?
The boat was hard steering before. Problem seem to happen mainly under power.
Is there a way to adjust...
PLEASE HELP! Poor steering on my 1973 Ericson 27'
I recently hauled the boat and replaced the plastic bushing around the rudder post, installed a new prop, but now the tiller pulls pretty hard to port. Any ideas on how to correct this?
The boat was hard steering before. Problem seem to...
I recently hauled the boat and replaced the plastic bushing around the rudder post, installed a new prop, but now the tiller pulls pretty hard to port. Any ideas on how to correct this?
The boat was hard steering before. Problem seem to happen mainly under power.
Is there a way to adjust...
I know this one's a long shot, but here goes. I've got what I believe to be the original over-cabin, 3/4 boom, traveler system on my 1973 E25, and the sheaves in the blocks are shot. Complicating this, is that I have been unable to find any identifying marks on the blocks other than an "S" or...
OK, unfortunatly I must sell my E29 that I have only had for a year! She has 5 sails just cleaned last year, Atomic 4 runs great, new carburetor and fuel pump, new gauges, cradle included. Needs a little cosmetic TLC but otherwise in great condition. Asking $9,000 or best offer. Located in...