Date: March 2023
With the number of rain storms coming through the SF Bay area recently, it's given me a good opportunity to see how the bilge pumps on SV Rumour are working -- and not. I realized a while ago that the shower bilge wasn't automatically pumping. No big deal -- water never goes...
With the number of rain storms coming through the SF Bay area recently, it's given me a good opportunity to see how the bilge pumps on SV Rumour are working -- and not. I realized a while ago that the shower bilge wasn't automatically pumping. No big deal -- water never goes down the shower...
Hello,
When I turn the ignition key in my 1989 E28, Universal M2-12, the electric fuel pump is supposed to run, correct? Mine does not; has anyone had experience with this?
The background of the question:
My engine was running great when I decided to drain the primary fuel filter bowl for the...
I am the new owner of a 1983 E 30+ and still underway in understanding the various systems in my boat. Hoping you all might help, in going over my new boat I have several questions regarding the bilge pump system.
First, I'm embarrassed to say that I can't find the powered bilge pump! I can...
I tried to open the new thread in Maintenance and Mechanical (raw water pump) and got nothing but a blank page. Tried it a couple of different ways, on a couple of different devices (PC, phone, etc).... no joy.
Anyone else seeing this?
Alrighty, either I am the worst googler ever or I have overlooked what I am sure is a previously discussed topic. My apologies. Help is appreciated...
1984 E30+, Universal M-20, Sherwood G908
Lost raw water flow yesterday, shut off immediately and had a docking adventure under sail. In-flow...
Has anyone in Marina del Rey used a mobile pump service? I found one called Popeye's
With my E27's engine needing impeller replacement (I'm working on it monday)....I want to have someone come over one time only and pump out my holding tank and clean the bilge of the stinky water (read my...
My old Sherwood water pump started leaking this summer. A seal failed, and water and oil dribbled increasingly from the base, in which the shaft turns. At first I rigged a funnel and a tube to route the water into a jug instead of the engine drip pan, which was getting filled up. Then I closed...
OK, now I have myself worried. I came here to see if I could find out information on finding an O-ring replacement for the water pump cover plate and have been seeing threads about the impeller shaft removal. As it turns out the shaft came out on me when I replaced the impeller. I had no idea...
One of my winter tasks was to get the (diesel) fuel tank on my boat cleaned out and the fuel polished. I have owned the boat for 8 years, use very little fuel each season, keep the tank full, and always used a biocide. I don't know what the PO did. One of the things the yard recommended was...
Just spent some time at my local Kubota parts dealer. Learned the Universal 5432 is based on the Kubota V5101 also used in the Kubota L345 Tractor. Most engine components are available direct from Kubota parts dealer, at a much reduced cost than many marine supply alternatives. <?xml:namespace...
OK, I have determined that my pump is not working after checking the filter. (I had to disconnect the ground wire from the mounting bolt in order to move the filter away from the bulkhead a little to get the cap off, but that's all I did.)
I checked it with just the ignition switch on and...
Hi,
So I'm feeling a bit stupid...bought a Facet-Purolator solid state electronic fuel pump (the cylindrical type), and it only comes with one wire sticking out the centre front. The instructions say to "connect positive power lead to the ignition switch voltage supply terminal". But there...
Hi,
I have read the various posts on these pumps, but still need some expert advice, please. I want to replace the electric fuel lift pump on our Universal 5416 16 hp diesel engine. The original is a Facet 574 A cylindrical pump, about 4 inches high and about 2 inches in diameter with the...
I am putting in a new head. I plan to route the outlet hose from the toilet to the holding tank. From there I plan to route one outlet hose to a deckplate for dockside pumpout, and another outlet hose to a through-hull for manual pumpout while underway.
Whale sells two different "Mark V"...
I have an '86 E-28 with the M12 Universal. I replaced the impeller on the Oberdorfer raw water pump at the beginning of the summer, and had no problems. However, today I noticed a water leak coming from the seal where the pump mounts to the engine. I tried to tighten the 4 cap screws, but...
Hi,
A recent post here mentioned that the bolt on the bottom of the older cylindrical Facet fuel lift pump (model 574A) can be removed to get at a screen/filter that should be cleaned periodically. I have done a search, but can't find any details on how this is done.
Is this as simple as...
The water pump on my M-18 engine has a metal backing plate behind the impeller and a paper gasket between the backing plate and the pump body. Does that gasket need some sort of sealant applied to it? If so, what type? (Same question regarding the thermostat gasket.)
The reason I ask is I...
I would like to replace the original electric fuel lift pump on our 1984 E30+ with the 5416 model 16 hp universal diesel engine. The existing one still works, but I understand they can fail without warning, so I think I'll replace it and keep this one as a spare (if that's not a good idea...
Hi,
The bearings on the fresh water circulating pump on our Universal 5416 16 hp diesel engine are growling, so I think it's time to replace the pump. I have been told that rebuilding it can be a frustrating and sometimes futile process, so was advised to replace.
I have a Kubota Tractor...
Just replaced the freshwater pump in my E38. The pump cycles from time to time, even when water isn't being run. In addition, each time it "burps" a bit of water out of the faucet for the freshwater foot pump. I have an accumulator tank installed. I've given the system a cursory check for air...
I have an '87 Ericson 30+. We bought it used, and it had a Shurflo water pump for the pressurized water system (galley and head). This pump appears to have died. I went to Shurflo's site to see if I could find the model number and came up empty. The model number is 220-223-34. It has a...
I have been having problems with my electric bilge pump set up and it got me to wondering what others have found to be a bullet proof set up.
I am not sure if it is the factory set up, but I have Water Puppy pumps for both the shower sump and bilge located in the starboard cockpit locker...
Does anyone know the specs for the electric fuel lift pump option for the Universal 18? I would like to have a spare pump (the current looks original) on hand and am not sure if any "generic" pump would work or if there are specific pressure/flow requirements.
We are planning a two week sailing trip on our E30+ to an area with less services, so I'm doing lots of prep work and some risk management to ensure the trip goes as well as possible. I normally don't carry our oil pump on board, as it's a bit bulky and potentially a bit messy if it tips on...
Hello everyone. It's time to replace the orginal fuel pump for my M12. Anyone out there that has a good source the help would be warmly recieved. NAPA has a pump for about $50.00 the pressure range is 4# - 7# I think the orginal is 6#-8#. Anyone ever use one?
Best,
Frank
I have an E-28+ with a dying pressure water system pump. Does anyone have any suggestions on sources for a replacement pump, or any particular advice on its replacement? I'm pretty handy but don't want to get in over my head, so to speak. Thanks
In replacing the impeller on my Sherwood water pump (M-18 engine) I have discovered that the backing plate behind the impeller housing is slightly scored - we're talking .001" to .002".
Can I try to "lap" that side of the plate surface to make it smooth again, and is .002" difference in the...
I just pulled this pump off my E-28. It was the holding tank pump and I am replacing it with a macerator pump. I fully rebuilt it before deciding to go with the macreator. Knowing what they cost new, make me a reasonable offer.
call joe 617 816 2370 or e-mail jgautreau@verizon.net
My Racor filter and lift pump are in an awful position to get at, any one have ideas on the best place to move them? Pics possibly? Just added this pic of my pump, it needs to be where it can be seen.
I would like to install an electric bilge pump in my '87 E26, along with a float switch. Can anyone tell me how it was done at the factory? What kind of pump (self priming, remote or centrifigal), location, routing of hoses and location of overboard fitting? I am hoping to not have to cut...
Fellow Ericson 23 owners,
Suggestions on installing an automatic bilge pump in an Ericson 23 Mark II fixed keel?
Some rainwater is collecting at the base of the mast post in the cabin, under the cabin floor. Most of the time I remove it using a turkey baster, and I am working on sealing the...
Hello,
I noticed water dripping from the bottom of my raw water pump on my
Ericson 28+ Universal model 5411 diesel. I bought new gaskets and a pair of
the round metal replacement seals to see if that would solve the leaking. I
would like to know if there is any thing special I...
I have a Rule three way switch with indicator light on my DC panel for the bilge pump and a float switch in the bilge on my 1989 Ericson 38.
The float switch when lifted will activate the pump but when the dc panel is switched to manual I get an indicator light but no pump activity.Any ideas...
The following is FYI for 5432 owners.
The fresh water pump (that's the one that circulates the engine coolant not the "raw water pump") began to leak on my 1981 E38. I was concerned it might be the bearings being near failure so wanted to replace it. The cost of a Universal replacement from...
I have "73 Ericson 35 MKII and would like to install a foot pump to the galley sink. If anyone hase done this and has suggestions / hot tips and pictures it would be greatly appreciated.
Thanks!
trl
Dagny T
Hull 305
http://www.ericsonyachts.org/infoexchange/showthread.php?t=3404&highlight=facet
Rather than patching on some more fixit information to this prior electric fuel pump thread, I will just reference it first.
I just changed fuel pumps (again) and now have a new Facet (aka Universal) electric pump...
One of our spring projects this year included removing a holding tank overboard discharge system along with the associated fittings. It was installed shortly before we purchased the boat 8 years ago and to the best of my knowledge was never actually operated. We are on an inland lake so the...
Googling for this has stumped me ... I'd just like to see what the insides of a manual Whale pump looks like without having to open the one plumbed into our pumpout plumbing.
Thanks,
-Sven
Looking to replace fresh water & Raw water pumps on my M25-XP. KKMI boatyard told me when I had it in for haul out that they would either have to take the front of engine apart or pull the head to replace fresh water pump. They suggested pulling & R&R head which will cost big $. Anyone have...
So I'm thinking I want to carry a spare electric fuel pump for my New England cruise but I can justify spending $160-$260 for a direct replacement Facet pump. Knock on wood the original pump seems to be holding up just fine but its one of those things that if it goes I will be engineless. Short...
What are the regulations regarding bilge pumps in the drip pan under the engine? I seem to recall from somewhere that this is not legal. A previous owner has two pumps installed under the engine and I am tempted to remove them. There shouldn't be any water getting into that drip pan anyway since...
I want to replace the output hose on my manual bilge pump to make it a little longer. It looks like some kind of plastic or PVC with a spiral reinforcing wire and PVC cuffs attached to the ends. It looks like this Shields hose listed on the West Marine site, but I don't see the cuffs listed...