raritan

Hi All, I have an older Raritan Compact toilet on my boat, which is a manual pump toilet that is currently not operational (there's a crack in the pump). This existing Raritan has been fitted to the original toilet intake and sink drain thruhulls (dangerous and not allowed for direct discharge...

OK trying find an acceptable way to say this. On my E32-3 I can barely fit my butt and other "neccesary body parts" through the opening in my head seat at the same time! Anyone else have this complaint? Raritan has two bowls for the PHII head, marine size and houshold size. The Admiral...

Spotted this today on Criags list. I have not interest bust seem like a good deal http://boston.craigslist.org/sob/boa/1715900778.html

Hi everyone, Just rebuilt my Raritan toilet (PHII) only to find the fitting on the back of the bowl where the water comes in is leaking. Not sure how the fitting was installed on the porcelin originally as it must have a flange on the inside of the porcelin. Would appreciate any...

My 1974 E27 has a manual Raritan head that is original equipment, as far as I know. I've fixed it several times, but its days are limited, and I'd like to replace it with a new head. Does anyone know if there are any manual heads sold by West Marine or other that fit directly into the existing...

Hello to all; I have purchased a 1990 E28 that I will be bringing home to Canada at the end of May. My first sail on the boat will be from Waukegan Illinois to Penetanguishene Ontario, 7 - 10 days on the boat with a crew of 3 guys and as few stops as possible. Obviously, we want the toilet to...

There was nothing wrong with it. As suggested by someone on another forum, there was indeed an overheat reset button behind the black cover on the heater. At some point the water tanks had probably been run dry and with 110 applied the heater shut off as it should. The fix was simple, one...

I have a Raritan PH-II manual head. It's not drawing water into the bowl, but seems to be having no problem pumping the water in the bowl to the holding tank. I tried to prime it by dumping a few buckets of water into the bowl and they would pump out but no fresh water would enter the bowl...

We replaced this head in '94, and this was the factory head for our '88 boat, AFAIK. No problems, per se, but this season it has been getting harder to pump and makes a loud whistling sound when pumped. As seems common for these, the turn valve for dry bowling is hard to rotate. My wife has a...

I just replaced my PH head with a PH-II. After looking the PH over I decided that it could be rebuilt. There was a set of spares from the prior owner so I set about cleaning and scrubbing. It is in good working condition now. The seat shows it's age. The inlet pump housing has a small crack...

The time has come to rebuilt the pump on our Raritan PHII manual head. While browsing the Port Supply catalog, I noticed there is an electric conversion kit available. Given that I'm willing to part with the $$$, does anyone have any coments about doing this. We have an E34 and do mostly...