• Untitled Document

    The 2024-2025 Fund Raising Season has Opened!

    EricsonYachts.org has opened the season for raising funds to support the expenses of the site. If you would like to participate, please see the link below for additional information.

    Thanks so much for your continued support of EricsonYachts.org!

    2024-2025 Fund Raising Info

part

  1. M

    dock damaje broken fiberglass in upper part of rail!

    I recently bought anE27 and has a crack aong the rail just avobe the rub rail and before the chainplates. I open the covers in the insight to asest the damage and the chainplates are intact, no damage in the deck to hull joint either. seems that somethin hit from the side. I see that a couple...
  2. Jeff Asbury

    Part artwork, part boat... literally!

    Part artwork, part boat... literally! See the rest here: http://www.gizmag.com/love-love-part-boat-artwork/16928/picture/124341/
  3. C

    What part is this? Mystery masthead part

    I've taken my mast down to replace the rigging and other worn out items. I have a mystery part that I don't know how to identify. I have a '73 E27 with what I understand is a Sparcraft masthead. There are two bolts that run through the masthead that have a fiberglass or ceramic sleeve over them...
  4. V

    any E-41 owners willing to part with information?

    I need info on a few projects I'm working on. raw water system, cockpit control panel, rigging, etc... I'm finishing up a restoration, well at least close to finishing and will be launching soon. E-mail me or we can talk directly the old fashioned way... by phone vanfuego@yahoo.com or...
  5. Mark F

    Princess stove part

    Does anyone have the Princess pressurized alcohol stove part on the left in this photo? Would you like to sell it? Thanks
  6. treilley

    The time has come to part with our beloved Ericson

    Kathy and I have decided to move aboard. Our plan is to live aboard for a couple of years and then do an extended cruise. Unfortunately our 35-3 does not suit our needs for this type of endeavor.
  7. G

    Need to part with 1971 Ericson 32

    I got this boat at auction several years ago for a song. The Atomic 4 was not working but all else seemed sound. I designed and installed a motor bracket on the transom and mounted a 25 HP outboard to be able to sail the boat. My dream was to do a complete restoration as I fell in love with the...
  8. Loren Beach

    Prop Comparisons, part two

    http://www.youtube.com/watch?v=B4xwJkUfU6o&feature=channel Current video of feathering and folding props tested by Yachting Monthly (UK). The rest of the article is in the magazine. I subscribe and do look forward to it each month, there being nothing to compare on this side of the pond. The...
  9. Randy Rutledge

    Rigging part needed

    I just returned from racing the Dauphin Island race Mobile Bay. On the return trip I lost a bottom half of a turnbuckle for my E29. The pin is 5/16 and the threads are left-hand 3/8 thread. See attachment. If you have this piece off your rigging you replaced I would like to work out a...
  10. Randy Rutledge

    rigging part needed

    I just returned from racing the Dauphin Island race Mobile Bay. On the return trip I lost a bottom half of a turnbuckle for my E29. The pin is 5/16 and the threads are left-hand 3/8 thread. See attachment. If you have this piece off your rigging you replaced I would like to work out a...
  11. mherrcat

    How bad is it? (Part 3: Stuffing Box)

    Once again, looking for opinions on what this might cost to have a yard do the work. This is what most likely caused the shaft coupling corrosion, but is probably the least expensive to fix...except that the shaft will have to be removed to replace the connecting hose, which is sketchy at this...
  12. mherrcat

    How bad is it? (Part 2: Boom Corrosion)

    Soliciting ideas on how this might be dealt with and what kind of cost I might be looking at if a yard does the work. This is on an E30+. This is something I might be able to do myself. It's a Kenyon boom and I believe Rig Rite may be able to supply spare parts; if any aluminum welding is...
  13. mherrcat

    How bad is it? (Part 1: Shaft Coupling)

    ...and don't start with the Johnny Carson routine, "It's so bad..." :) I have some issues to deal with: Shaft coupling, boom corrosion and stuffing box. I'm going to post these in three different threads so there aren't too many pictures in one thread. The boat is coming out for bottom...
  14. T

    Universal M-18 "auxiliary water pump?" part number/replacement

    Over the weekend, my v-belt broke. Further inspection indicated that what might be an "auxiliary water pump" seized, thereby stopping the rotation of one of the 3 pulleys around which the v-belt travels and causing the friction that caused the belt to break. I'm not even 100% certain it is a...
  15. B

    What's this? (part two) - Instrument Thru-hull

    E23-2 1975 just foward of the mast post in the cabin between the post and the foward berth housing there is a small square panel. Pull it up and you have a large plug with stopper in it. When you pull the plug it looks like the whole lake is flooding in!!!?? what the heck is this plug for,,,is...
  16. footrope

    What is this? (part one) - Thru-hull

    The fitting in the picture was removed from the intake side of the raw water strainer, It was mounted on top of the raw water thru-hull valve. It seems to be a safety device, but I don't understand the exact function, how to activate it, and why it is safetied the way it is. The last time I...
  17. treilley

    Impeller part #

    I have searched the archives and cannot find what I need. Does anyone have the part number for the oberdorfer impeller on my M25XP?
  18. bigtyme805

    Boat Delivery Part 2

    The motor seems to be handling great and the boat has survived so far and the owner is under the dodger with me telling me about his bad luck the past few years and I am starting to wonder if he really does have bad luck as the waves crash over the beam. At the 5 mile marker of our...
  19. T

    Coolant cap Part number M-50

    Long shot here but does anyone know the correct radiator cap for an M-50? I am sure there is a commanly available cap that I can get at an auto parts store but they are all a little different and the one I bought that I thought would work does not appear to be long/deep enough. I am hoping for...
  20. L

    Need Help Obtaining Part for E-29

    Requesting help in obtaining a part, I believe it's called a "Cutlass Bearing"? It's found inside the strut that holds the propeller shaft, the shaft itself is 3/4 inch in diameter. It appears to be hard rubber or plastic. I've checked the usual places i.e. West Marine, Defender, etc. I may...
Top