EricsonYachts.org has opened the season for raising funds to support the expenses of the site. If you would like to participate, please see the link below for additional information.
Thanks so much for your continued support of EricsonYachts.org!
Parting out a 1988 Ericson 28’ in Southern Maine
New Main sail
Interior cushions (immaculate upholstery)
Universal M12 (runs great)
Richie Compass
Boom
Mast
Standing rigging
Winches
Lewmar hatches
Alcohol stove
Interior components like dining table
Water tank
Both electrical panels
120 Genoa...
I am having new sails made for my E27 and will be sailing the Salish Sea in WA and the coast of BC. My previous late spring through early fall experience here has been one of predominantly lighter winds with occasional strong gusts or fronts coming through. I want to optimize sailcloth weight...
I have several Ericson 38 sails in almost new condition, all having been used very lightly for only a few weeks/half a season. Purchased for my 1984 Ericson 38 which met with an accident during a storm at the dock. The boat was totaled by the insurance company and the sails were not on the boat...
Used 150 Genoa for roller furling from an Ericson 34-2 measures Luff 44 ft. Foot 22.5. Unsure of age but based on limited boat history and good condition of sail I suspect it has 1 season in the Chesapeake and 7 seasons in Maine. Built by North, has rope inserts at luff for better sail shape...
In good+ condition according to Atlantic Sail Traders in Sarasota, FL, where it is listed for $1,100. I will sell for $750+ shipping!
Inquire for exact dimensions and pictures.
Located in South Florida and can demonstrate before purchase.
Was a backup sail for our Ericson 38-200. Perfect condition with less than 10 hours of use. Located in Maine. Luff 47.57 feet, Leech 44.91 feet, Foot 22.83 feet. $600.
I am the new proud owner of an Ericson 35-3 and I knew I would have this problem sooner or later. I was hoping it would be later. Oh well.
I need a new Genoa. It looks like the one that come with the boat is a 150. The Sail Loft is recommending a 135. But, this is not my question. What...
Does anyone have any thoughts, experience, or recomendations?
I am shopping for a new 150% genoa. After getting 6 quotes from sail lofts, Mack Sails prepared the best quote... does anyone out there have experience with them and more specifically the "miter cut" genoa? His quote was for 5.77 oz...
<hr style="color: rgb(255, 255, 251); background-color: rgb(255, 255, 251);" size="1"> Looking for a little advice from you experienced E25+ and E26 owners....
I'm about to purchase a 1988 E26 (hopefully before week is out) and it needs new sails. I'm...
Could someone please verify for me the size of genoa track on rails. From Specification in Standard Equipment document for E-32 1972 is - 1 1/4 " stainless steel genoa track, my boat has aluminum track. I am not 100% sure exactly the measurements cause my boat is currently docked in Mexico and...
I recently purchased a used genoa for my E23. After getting the sail I noticed that the reinforced portion of the sail for the spreaders was lower than it should be by about 18 ". Also, that the sail sweeps the deck and has 18" of gap at the top of the jib halyard when the sail is raised...
I've been saving my sheckels for a new roller furling genoa. I have gotten (or am still getting) quotes from all the usual lofts in my area & beyond. I may end up with dacron (polyester), but I would prefer a laminate, radial cut sail. My old genoa was a mylar laminate, RIP. That is rest in...
Had a great week of sailing last week out of New Bedford, to Elizabeth Islands and to Martha's Vineyard. I've got a rigging question. My boat is 1980 E-25+, furling genoa. When genoa is out, it is (in almost all circumstances) pushed right into the pulpit rail. So the bottom couple feet of...
We just started racing wed night series in San Diego. Looking for a decent
150 Genoa that still has some life left. We are using a Kevlar Genoa from
a NY 36 that is decent but not a perfect fit. Please contact me if you have a sail you are willing to part with.
Must fit a Harken #6 Roller...
All, I'm having the Devil of a time finding four bronze 1 1/4" ABI Genoa slides and would appreciate any and all help finding these slides that are no longer available as ABI has gone out of business. These slides have two small pins through the knob that hold the main pin up when turned 90...
I just bought adjustable genoa cars for my E381 from Garhauer. Does anyone have experience with them and have advice on a) rigging the control lines and b) using them underway? I have a basic understanding of what I want to do, but it sure helps to hear from someone who has already worked with...
Anyone know the dimensions of a 150 genoa for an E35-II.
The luff is easy enough...mine is 41' 6" for my furler, but I
am not sure what I should be looking for in the leach length
or the foot. I want a deck sweeper (or as close to it as I can)
for the light NW summer winds and for a little...
ok i have a roller for my jib there are 2 tracks in the roller for the sail do you put the sail [n either side or does the sail have to be special for the roller i ve never used one if possible show pics to make it clear for a new roller operator like me it came on the boat but had no sail...
I have the original multi line Merriman genoa lead cars on my boat. I would like to swap them out with new ones that have bearings and possibly an adjustable car system. The problem I am running into is that all the cars I have found on the market today have 3/16" shoulders that go under the T...
I'm looking for a used 150 furling genoa for an E32-200. Reported I and J dimensions for the boat are 42' and 13.8. Dimensions of the used sail I'm interested in (which is a long distance from here) are I 39'6" and J 21'4". What additional information do I need to get to figure out whether this...
Hello,
Can anyone recommend a good genoa lead block for my E27. Also does anyone know offhand the width of the track on the 27. I noticed the old schaeffer block was on the verge of letting go so I removed it last weekend but forgot to measure the track for the replacement. I am thinking...
I presently, delaminated my 155 genoa and have been in a quandary about what size the new genoa should be.
Sailing for light are conditions vs. the heavy air and furling the genny. Both my main and genoa are North 3DL sails. I very much like the performance of these sails, but at the same...
At long last, the sheaves in my genoa lead blocks are starting to fail. I have noticed a style change in the way the blocks and cars are attached. There is what I perceive as an older free standing type block on a spring base versus a low profile block that is attached to the car so it can...
Genoa 155% (?) for 26' Ericson
Hi All,
I have given thought to selling my boat, however what whould improve my sailboat would be a larger jib. I just have a 100% jib sail and am under powered in light winds. Would anyone have suggestions for a replacement?
Thanks
Hi All,
I have given thought to selling my boat, however what whould improve my sailboat would be a larger jib. I just have a 100% jib sail and am under powered in light winds. Would anyone have suggestions for a replacement?
Thanks
I am hoping to find a used roller-furling genoa for my E27 as I am converting from hanks to RF. Something in the 135-150 range. I have checked most of the usual online outlets (Bacon, Minney's, Sail Warehouse, etc.) without success so far.
If anyone has such a sail, or knows of one that's...
Isn't it funny how one project turns into another...
Since the orginal foam backed hull liner in the quarterberth had degraded and was emitting an orange dust, I decided to replace it with new foam backed vinyl (after much deliberation about what material to use). So I ordered enough for the...
I will need to remove the Genoa Track on my Ericson32. I can't find any nuts connecting the screws. Are the screwed directly into the deck/hull? I also need to remove the wooden handholds on the left and right side of the mast.
Two furling sails in good condition for E27. 130% furler has a brown UV cover and the 170 has a white UV cover. I removed roller furler system and replaced with traditional hank-on sails when I replaced the rigging this past season as I can't stand Roller Furler sails.
Combined Price...
Hood 150 genoa for sail radial cut , luff grove for harkin track. would have to be shortened to fit on furler. Sail is in very good condition. Will ship to inspect. $150.00
Hi:
Looking for a used genoa in reasonably good condition for a 1975 E32-2. Ideally, it would be about a 140% with a luff of about 36ft. I'm kind of new to the Ericson community as last season was my first with this boat and would appreciate any help or advice any of you guys might have...
I've just purchased adjustable Genoa tracks from garhauer for my E35mk11-1970. These tracks are intended to be installed inside the lifelines alond the base of the cabln. The question I need to answer is where these tacks should go and how long should they be? Do I need to do anything to the...
This pristine PENTAX-MYLAR LAMINATE 155% GENOA by Schurr Sails was designed for racing...... made from 4.1 oz material called PE10 with a Tri-Radial Design, this beautiful sail has been used only five times. Purchased last Spring, 2006 it is now available for sale. As cruisers on our little...
Greetings,
While considering the addition of an easy-to-tack headsail for our boat, I had a nice talk with the local North loft mgr yesterday. I admit to being influenced by my short sail on an Alerion 28 last April while at Strictly Sail in SF.
Self-tacking is... Ahhh.... Wonderful. :)...
I have a Doyle 150% roller furling Genoa from my '83 E381. Boat has the 45ft mast, IIRC? Genoa is 2-3 years old, purchased by previous owner, has a fairly high clew for decent visibility. The 150% is simply too much sail for most of the sailing we do here in RI. The leech line cover at the...
I am replacing this sail with a new one. I will get some other pictures and specific measurements if you are genuinely interested. This sail is a Harrstick, dacron probably 6.5 oz. with triple stitched seams and dark blue sunbrella on the leech and foot. It has a foam luff and reefs reasonably...
I have a main in very good condition and a 150 Hood genoa in very good condition. will be willing to ship for inspection. will not be disappointed,$200 each
I am trying to decide what size genoa to get for my 89' e-38. I am planning on doing some racing this fall and next summer as I get the boat optimized, but mostly cruising. I have decided on laminate material of some sort over dacron. It is going to be on a furler for sure. What I am not sure...
Anyone here familiar with how the genoa track is attached to the toerail of a 39? Guy? My suspicion is that the toerail is just a piece of fiberglassed wood, and the track is held in place with big honkin' wood screws. With the liner in place inside the cabin, I cannot see any sign of through...
Wanted 130 rf genoa with cover for Ericson 38
Will trade 155 rf Genoa that fits ericson 38 Foam luff vertical panel good condiition
155 has high clew for crusing
This sail is like new. It had been recently purchased from Scott Sails in Annapolis by the previous owner. It was part of his racing sail inventory and I do not race. Not officially, anyway:egrin: The sail is currently on consignment at Bacon Sails in Annapolis. Let me know if you're interested...
Hello all,
I have fairly large sheets, 1" on my 125% genoa on my E38. I have attached them with a bowline knot for each. Is there a less messy knot to attach two large sheets like this? I have looked in my knot book but can't seem to find an alternative. I am thinking that splicing an eye...
I have an almost new (really) 155% mylar Genoa for sale. The sail has about ten hours on it, used in twilight races only. Built by North, cost me $ 2200, has hanks (can be converted to grove luff). When I sold the E29 I held the sail back. I listed it on this site for $ 1000, but did not get...
I am selling a used main fo an 1988 E-26 built in the early 90's but not used for 6 seasons , It is in very good shape, I upgraded for racing $200.00 or best offer. I also have a Hood radial cut 150 with a luff tape in very good condition . I am upgrading to a 155 . $200.00 or best offer...
E-29 155% Mylar Genoa For Sale
I have a near new Mylar 155% North Genoa for sale. This sail has less than 10 hours of sailing time on it. It is equiped with hanks, but any sailmaker can change to a luff rope for a grooved headstay. I paid $2200.00 in 2003, would like $ 1000.00 but will...
I have a 155% genoa made by Scott Sails of Annapolis for my E35-3 in 2003. I recently bought the boat and don't intend to race so I've decided to sell this sail. It's in like new condition.
Because of the difficulties of selling sails long distance, I've consigned with Bacon and Associates...
Hi All,
Had a bit of a mishap with my genoa during a fantastic sail this past Thursday night. Looks like she's not worth repairing. Anyone have something serviceable they are tired of tripping over? I am more than willing to pay reasonable value for the sail. Looking for a luff of about...
I have a hardly used 155% North Mylar Genoa with hanks for sail. I don't think it has even ten hours of use. I bought about 3 years ago for $ 2200 from North Sails in Newport Beach. I sold the boat last year but not the sail.
Hank Thayer at the loft said changing from hanks to a rope luff is...
My recently purchased E35-3 came with a suit of recent racing sails which are in excellent condition. I don't plan to race (formally, that is) so I'd like to sell one or two of these sails which are nearly new.
The sails, a 135% and a 155% are carbon fiber laminates made by Scott Sails in...
Anyone ever attempted this one? Mine may be leaking some on the strb side. I am not 100% certain if it is the toerail mounted track, the rub rail, or possibly the scuppers. Water is certainly getting in though and when I stick my hand up there it seems to be coming from the toerail area. Looks...
Hello all, this is my first time on this site. I bought an 1986 E381 last year...love this boat so far! However, I have no genoa car blocks on the inside tracks and am thinking about doing some club racing. The Shaefer blocks I have on the outside tracks will not fit on the inside tracks...
This is a dacron, 4 oz most likely, 170% genoa for an E-32 standard rig. The sail is older, but still VERY useable. Great for those light air days that there is just no breeze. Sail has hanks, all my sails are now #6 luff tape. Asking $350.00, e-mail me if interested.
I recently purchased a E-35 IIand am looking for a furling genoa.
Can anyone give me some insight as to what size I should be looking for to cruise the Northwest and Canada's Gulf Islands.
Is the 35 happier with a 150, 140 or what? If any one out there has a suitable genoa in very good to...
My boat is currently configured to sail the genoa from pullies on the toe rails. I have been contemplating installing tracks and lead cars, but would like some input from the rest of ya'll.
Have any of you done this yourselves? If yes, any gotcha's, hazards, pitfalls of doing the work...
Kevlar-Mylar Genoa. This came with my '88 Olson 34 (tall rig), and was used for three seasons. Foil headstay tape. Condition is fair to good, with one patch. Built by Marion Sailmakers, somewhere in the SF Bay area.
Luff= 44', Foot=20', Leach=41'5", LP= 19'.
$175. plus shipping.
I bought the...