• Untitled Document

    The 2024-2025 Fund Raising Season has Opened!

    EricsonYachts.org has opened the season for raising funds to support the expenses of the site. If you would like to participate, please see the link below for additional information.

    Thanks so much for your continued support of EricsonYachts.org!

    2024-2025 Fund Raising Info

e27

  1. S

    For Sale: E-27 -1978 in Great shape- Boston

    HI, I am finally parting away with my E27- It is up for sale and the price includes winter storage (Hingham, MA) and spring launch. Boat is in the water until Mid to end OCT/06 and it is in sail away condition! For details, pictures, complete listing and price here is the URL to my ad...
  2. A

    Rubrail insert E-27

    Can anyone match the Ericson standard rubrail insert to the inserts at <www.tacomarine.com> ? Pacific Seacraft does not sell the inserts any longer and the number on the webpage not not indicate the manufacturer.
  3. S

    E27 Rudder

    In the forum " For Sale & Wanted", I had a question about the E27 rudder concerning an improved design. Responses revealed that the Foss Foam Company did have an improved design, and would cost $950.00 plus shipping. I would like to know if anyone has this improved rudder on their E27 and what...
  4. J

    Changing packing in E27

    Hi There, It seems my packing has met the end of its usefullness as no matter how much I mess around with the adjustment it still leaks a few drips per minute while sitting at the dock. If under power it drips quite a bit more. It seems that there is no way to change the packing easily as...
  5. S

    E27 Rudder

    Is there an improved E27 rudder design, or can the existing rudder be modified to provide rudder feedback on E27's with steering wheels
  6. Q

    E-27 Atomic 4 oil change

    Heres a quick and hopefully easy question for you guys. How in the world do you change the oil on the Atomic 4 that was put in the ericson 27 (diagrams would be helpfull). Thanks.
  7. T

    Replacement water tanks on E27

    The PO of my E27 removed the factory water tanks to save weight. While He was primarily interested in racing, I use Ol' Blue for cruising. Until now I have been using potable water stored in various containers around the boat but I am thinking about installing a water tank and foot pumps. I...
  8. D

    interior cushions for E27

    Any recommendations for a vendor to replace interior cushions for an E27 in so. California? thx in advance db
  9. J

    E27 keel bolts

    I am looking at purchasing a 1971 E27 Hull #128. While looking over the boat this weekend (7/1/06) I pulled both of the floor access panels. Under each panel is one keel bolt in good shape and close to the good one there is another rusty depression which appears to be the remains of another...
  10. S

    E27 Length Modification

    I have a 1972 E27:egrin: with a 2 foot transom extension. Can anyone give me a good reason that this would be done other than to add extra dollars onto the storage and docking fees? I have a few ideas, but none that are probably correct. A little help here. I haven't had the chance to tack...
  11. S

    E-27 Reefing and Sail slugs

    I just purchased a 1976 Ericson 27 for seasonal use on a Colorado lake. While installing the main/boom into the mast I must first insert the gooseneck for the boom into a five inch slot in the mast and then lower the boom so that it rests about five inches below the slot. I install a slug...
  12. D

    Old E27 Gooseneck and Boom

    Here's a picture of my old bent and twisted gooseneck:
  13. J

    Prop shaft diameter for 74 E27

    Hi Does anyone know offhand what the diameter of the shaft is for an E27...i need to change the zinc while in the water and want to have the right one on hand when i can get a diver over..i believe the shaft to be original with the original Atomic 4 inboard....for some reason iam thinking...
  14. R

    E27 Exhaust Riser

    Just found a exhaust leak in the exhaust riser on my atomic 4. I'm replacing the black iron pipe riser and trying to order parts. I forgot to measure the nipple length. Anyone who has cobbled up a pipe riser remember how long the straight pipe nipple is? 4 6 or 8 inches????:rolleyes: ( I'm...
  15. bigtyme805

    Custom Berth in Salon for E27

    I want to fabricate this exact berth on my E27 and I am wondering if anybody has done this? If so maybe you could give me some tips. This photo I found online. Thank you...
  16. J

    E27 hatch puzzle

    When I acquired my E27 I there was just a board covering the front hatchway. The previous owner removed the hatch and had a new one constructed. The only thing is I was handed all or some of the hardware in a zip-lock and a new hatch with some pre drilled holes in the plexi with no idea how it...
  17. P

    74 E-27 For Sale

    PRICE REDUCED - 6500 with rudder repaired or 5000 as is. I am selling my Ericson 27 which is located on Lake Texoma. Price was $7500 until the tiller/rudder shaft bolt sheared and the rudder sank. Foss foam can make one for about $1,000. I can install it or reduce the price $1,300. That's...
  18. J

    Bridge Clearance E27

    Hi there can anyone tell me the height of my boat from the water to the tip of the mast? I have a 1974 E27 standard rig as far as i know. thanks jarod
  19. P

    E27 Rudder

    I have a 74 Ericson 27 with a tiller. The last time I sailed, which was in September, the bolt that connects the tiller head and the rudder shaft sheared. I was able to make it back with half a bolt holding the assembly together. I took the bolt and the tiller off when I got back to the slip...
  20. J

    Fixing leaky windows on 74 E27

    Hi All, Going to tackle a leaky window or two on my boat this wkd, does anyone have any recommendations on what I might need to complete the job. I want to stay with the original look no lexan replacements. I guess i would like to know the basic idea before pulling out the window. thanks
  21. E

    E-27 Type Keel Failure Poll

    As many are aware, the E-27, and some of it's close cousins (I think we're talking 25/26/28/29 here) have a very deep sump in the aft portion of the keel. This has been a topic of much speculation as a failure/worry item. Quite honestly, I think this has been hyped out of proportion with no...
  22. J

    E-27 spreader brackets

    I'm getting ready to have some work done on the mast, and want to make new brackets for my speaders. The old one's we know the problems with them. So my question to all of you is I remember some photos of brackets that someone had made. I beleive they where fttp file at sailnet. shhhh. Does...
  23. A

    E-27 standing and running rigging specs

    Does anyone have any spec sheets for the E-27 standing and running rigging like the E-26 sheets on the Specs and Documents Doc Index?
  24. A

    E-27 Spars

    Hi, I am starting to do some rigging work on my 1978 E-27, and as a first step I am trying to verify if I have a standard rig or not. I am familiar with the Kenyon Spars which have a tear drop shape to the cross section, and had thought that was the standard on all E-27s. However, looking...
  25. Ian S

    Headsail reccomendation for e-27

    I sail around the chicago area and currently have a totaly shot 6.5 oz. 135% on a furler. I have not gotten a strait answer out of any sail loft for what an aproprite headsail size would be for general use on this boat. It is a high aspect rig and would like to put as much sail up front as...
  26. G

    New Carpet in my E27

    The old carpet over the cabin sole in my E27 has turned to dust. I would like to replace it and am open to any suggestions as to what may work best. I read a post by Loren Beach back in 12/00 that was a good one..low loop, edge bound, and ss snaps to hold it in place. Any other suggestions, type...
  27. T

    E27 Seacocks

    I am in the process of replacing the antiquated ball valves with new seacoks and have an E27 specific question. The existing installation of the ball valves is flush mounted, rather than mushroom. When I removed the old plumbing and plywood pads there was a built up lip of fiberglass under the...
  28. H

    Gauges on E27

    My 1975 E27 oil gauge is dead. I'm having trouble identifying it as there is no identifying mark on the body. The gauge reads vertical 0 - 40 - 80 and has an anodized aluminum frame. The back side is a pale green plastic and the tinned studs on the back are about 3/4" long. The only markings...
  29. R

    Dodger wanted E27

    Am trying to find a used doger and bimini for my e 27. Also looking for used tiller pilot Thanks
  30. J

    Wilma claims E27

    My 1976 E27 became a victim of Hurricane Wilma. Actually only lost mast, roller furling, sail and several gouges, etc. Insurance has estimated repair costs exceed insured valued (less than $10K), so they have declared her a total loss. However, they have giving me option to retain salvage...
  31. M

    Who was that pretty E-27 that hailed us off San Pedro Sunday

    Whoever owns the E-27 that we saw off San Pedro on Sunday really keeps a nice boat. We were sailing our E-30+ out and it took me a couple of minutes to realize that it was a fellow Ericson owner that we saw. It was a great day for sailing, unfortunately my daughter's friend got sea sick so we...
  32. G

    Improving Ventilation in E27

    I would like to improve the ventilation in my E 27. Has anyone added cowl vents with dorade boxes, solar ventilators, etc. with success? If so, where were they placed to be aesthetically pleasing and functional? In addition, I am thinking about replacing the cowl that my anchor chain and rode...
  33. T

    Replacement outboard for E27

    I am the new owner of an E27 #428. She has an older 15 hp Johnson outboard and I am looking into replacing it with a newer 4 stroke. I am looking for something quieter and cleaner. I have visited the local marine stores and I am told a new 4 stroke of about 8 to 109 horsepower would provide...
  34. H

    E27 Holding Tank Replacement

    I'm looking for info/pics/data on "the" factory holding tank solution for my 1975 E27. I've searched here and elsewhere for "E27 holding tank" and "holding tank" and haven't found all that much... :confused: Here's the scoop - on her (5 day) maiden voyage down the Chesapeake to her new...
  35. Jeff Asbury

    E-27 Sails For Sale

    E-27 Sails For Sale North - Main with one set of reefs, includes battens. Standard Rig. 6.5 oz with some patches. $25.00 Rice - Main with one set of reefs, includes battens. Standard Rig. 5.5 oz very good shape. $100.00 140% Furling Genoa with Bright Blue UV. $150.00 Shipping...
  36. D

    FS: mail sail, jib sail, tiller handle - parting E27

    I’ve decided not to complete my E27 restoration project due to costs overrun & the fact that I have received a wonderful perfect condition Morgan 35... I have everything for sale, mainly I have ready for shipment is my main sail, the jib sail, and the tiller. The sails are in pretty good...
  37. M

    E-27 boom upgrade

    I am looking to change my boom to internal outhaul,and reefing lines, and possibly a rigid vang. I have not yet identified the boom section. Can anyone suggest a vendor, for parts, and suggest what boom section might work?
  38. K

    Wanted E27 Main Sail

    Anybody have suggestions on replacing an E27 main for the SF Bay area? While sailing last night, we noticed a hole developing around one of our battens. I know... with Katrina and Bagdad tragedy stories filling the papers, this sad tale pales in comparison. However, because our wives anger...
  39. R

    New Traveler for '73 E27

    I'm still in the dark ages with my original "no control lines" traveler for my '73 E27. Therefore, I never adjust it. Was going to order a new controllable one from Garhauer, then looked carefully and there is a very slight curve (1/2" over 22" or so) in my existing track. I haven't talked...
  40. R

    E27 Icebox drain to sink drain?

    Anyone tried to "tee in" the ice box drain to the sink drain. Looks like the bottom of the icebox is slightly above the thru hull and it should drain OK. I'd like to get rid of the icebox draining into the bilge. Of course, one would have to make sure the sink thru hull was closed while...
  41. R

    E27 Rubber Muffler (?) Near Transom

    What is the rubber thingee that is in wet exhaust line just before the exit opening in the transom? I looked in the West Marine catalog and can't find anything like it. I just replaced my entire exhaust system (again), except for this thing. Since it's 32 years old, I'm wondering what it...
  42. J

    E27 Location Battery Banks

    My 1976 E27 has 2 - 6volt batteries in series, which has worked very well thus far. However, I want to have a second bank for house power. I may replace these batteries, which are now several years old, with two deep cycle 12 volts, size 24 or 27. This is an outboard model, with fuel tank...
  43. Q

    E27 steerage

    As I was out sailing my E27 one day I needed to go down below to to grab some food(I was broad reaching at the time) so I tied some lines to the tiller and went below. Upon returning to the cockpit I found the boat alomost ready to gybe. MY thinking is its either my rudder or my sails(my sails...
  44. A

    E-27 Fuel Tank replacement

    The fuel tank in my E-27 has decided to store its diesel in my bilge. It appears that 30 years is the life of the aluminum tank. I have followed the old threads on this and am now looking for the answers to the questions that have been raised. 1) While I have measured every dimension I am not...
  45. R

    Need specs on 1973 E27 Fuel Tank

    I pulled my fuel tank and took it to a local "tank shop" for a new one. They LOST the tank. $%^&*(( I took approx dimensions of the exterior, but not location of the filler opening. I looked at the docs in the Specs/Docs section and none for the fuel tank. Anyone got a drawing? If...
  46. D

    E27 boom end castings for sale

    I've had to replace my original Sparcraft boom. The end castings are available if anyone is interested. $25 bucks and postage aughta do it. Dave Hussey Bluewing batduck@mindspring.com
  47. M

    E-27 For Sale, Portland, Maine

    1979 Ericson 27 For Sale $12,500 Located on the hard in Portland, Maine ·White with blue bottom, blue bootstripe and blue cove stripe ·Bruce King design ·20’ 6” waterline, 9’ beam, 3’ 11” draft, 7000# displacement ·20 Gallon fresh water tank ·Atomic 4 inboard engine runs flawlessly ·...
  48. D

    E27 inboard to and outboard???

    I have an E27 and am pulling out the a4 and am going to a outboard. I am wondering if anyone here has cut out the transom like the factory boats? I will probably go to a mount on the back but am searching all posibilitys first.
  49. bigtyme805

    Main Sail for E-27 For Sale

    Hi everyone I will ask the forum first if anybody wants to buy a Main Sail for an E-27. It is in good shape. If I dont hear anything I will post on ebay. Here is a pic. Don Anderson E27 Amigo Channel Islands
  50. T

    E-27 Water leak from mast step.

    I have a 75 e27 with a substantional water leak coming from a hole the previous owner drilled in the mast step. The whole is used for the electrical that runs up the mast. The water has rotted away a section of the plywood that is the wall of the head. Also with a VERY small amout of rot is...
  51. R

    Just pulled my '73 E27 gas tank

    FYI to E27 Owners: Today I just pulled the gas tank out of my '73 E27. It was much easier than I expected. Of course, I'm the "worrier" type that always thinks of the things that could go wrong. Basically: a) Cut the fiberglass cloth that holds the bottom of the tank short sides to the...
  52. R

    E27 Reaching Strut

    The E27 manual recommends using a reaching strut with a symetrical spinnaker. Can anyone supply photos, drawings, specs, etc. that would show how to make and install one? My spinnaker sheets definitely drag on the shrouds when reaching. Raleigh
  53. J

    Water entering rudder post E-27

    I've been trying to determine in the last year where an extensive ammount of water has been coming from in my bilge. Well alas I've found the source.Yesterday while running at excessivly high RPMs on my Yanmar 2GM the stern sits quite low in the water (exhaust outlet is level with water line)...
  54. R

    E27 Mast Length

    Does anyone know the mast length for the E27 Standard Rig (1974)? I know the "I" dimension and the height from the waterline but am looking for the actual length of the mast itself. Thanks. Raleigh
  55. S

    E27 diesel replacement of Atomic 4

    Has anyone got a Diesel in an E27 and what model is it? I have an atomic 4 that sat full of water for a year until I recently bought it. 2 pistons were siezed and half the valves are rusted to the guides. The carb and air box are missing, and the piston rod ends are way too sloppy. It needs a...
  56. B

    E27 standing rigging tension

    A few years ago, someone on the Ericson sailnet forum posted some rough guidelines for setting the tension for the stays and shrouds on an E27. I used them then, but have lost the posting. I've posted this request there, but figure that not everyone reads both, so... That said, I'd appreciate a...
  57. K

    '78 E27 For Sale:

    27’ Ericson, 1978; Performance cruiser , meticulously maintained by knowledgeable owner and updated since 2001 with numerous items including sails, RF, upholstery, electronics, running rigging, engine upgrades and gear. A4, wheel steering, ST winches, bimini and cockpit cushions. Boat in...
  58. R

    Looking for Bow cap for rub rail for e27

    Hello all, I' looking for the bow cap for my e27 rubrail. Anyone have one they want to part with or know where I can get one? Thanking you in advance. Ray :egrin:
  59. D

    E27 traveler relocation pros and cons

    I just bought a boom originally built for a Dana 24, to replace the damaged spar on my E27. It is 6" longer than mine, and uses end-of-boom sheeting, whereas, the E27 has mid boom sheeting. I am considering moving my cabin top main sheet traveler to the aft end of the cockpit to accomodate this...
  60. P

    Wanted - E-27 Head Door and Table

    As some of you know, when I bought my 1972 E27, it did not have the dinette table or the head door. If anyone out there has a spare they'd consider selling me, I'm all ears. Very tight budget, though. I'll likely build my own but if there's one lying around....... Thanks...
  61. D

    Restoring E27

    I am restoring an Ericson 27. I am just getting started, but thought some might want to see the progress & other info about the boat. I have started a "blog" on it with lots of photos, you can see it here: http://www.helpmenetwork.com/boat%2Dweb%2Dblog/projects.html If anyone has any info...
  62. O

    E-27 Sliding Hatch

    Hi all, we just purchased another '78 E-27 "Bijou" off of Craiglist. The sliding hatch is like brand new. When we asked the previous owner he said he bought it from Pacific Seacraft? Has anyone on this board purchased any parts from them before?
  63. S

    1974 E27 incorporation of sink and drawers

    I have a 1974 E27 with no sink, counter or drawers in head area. Old catalog depicts such a feature. Where do I obtain hardware and specs ? Please Call Don Swanson (619) 424-9800 :esad:
  64. bigtyme805

    E-27 on Ebay (for sale)

    I was browsing on Ebay and saw an E27 that is in good shape. It is located in LA the bidding is at 50.00 with no reserve. Somebody will get a good deal. Has a redone A4 and the sails are in good shape so if you are looking for one it appears you can get good deal. Anderson E27 Channel...
  65. G

    Garboard Drain for E-27?

    I am currently working to restore my '73 E-27 to Bristol shape. I have not yet gotten all of the fittings replaced/rebedded. Thus water accumulates rapidly in the bilge. (Time/weather not co-ordinating with budget). A friend suggested installing a garboard drain in the area aft of the keel. I...
  66. D

    1973 E-27 for sale, Lake Ontario

    I have a 1973 E-27 for sale, freshwater boat, good condition. I am the second owner, and I crewed for the first owner. Spinnaker equipped, tiller, smooth running 87 Merc OB. Sails are in excellent shape, all 5-10 years old. Diax main and 163% Genoa #1, Dacron/Kevlar 135% headsail(oldest sail)...
  67. R

    E27 RPMs vs. Knots

    I finally installed a tach on my 1973 E27 (with original Atomic 4) I've had for 20 years! Tried it out the first time yesterday. Idle reads around 600 RPM, which sounds about right. Behind the breakwater in calm water I was doing a bit over 5 knots at 1250 RPM. This seemed like low RPM for...
  68. F

    Rub rail for an E27

    I would like to replace the rub rail on my E27, does anyone know where and how I can obtain a new one? We've had some rain here in southern Nevada this past month (a lot of it) and the oxidation has run onto my newly color-sanded and buffed hull sides (and they look great too btw). Anyway...
  69. R

    E27 in Portsmouth, VA

    I sail my E27, "Second Wind" out of Portsmouth, VA. Would be interested in linking up with other Ericson sailors in the Tidewater area for cruising or daysailing.
  70. R

    Replacing fuel tank on 1973 E27

    I'm having a lot of problems with either rust or varnish in my original 15 gallon steel tank. I've decided to replace it for greater confidence on trips. The tank is 10" high X 16" wide X 24" long and located between the engine and rudder post. The long dimension is across the boat...
  71. N

    Lifelines on E27

    Do you remember when we discussed this subject? Attached are pictures of the three ways I have seen this done. One is a little clip that holds the lifeline to the shroud. I had not seen a clip like this one before, it was quite simple and refined. You can barely make it out in the...
  72. R

    Boom gooseneck problem on '73 E27

    The gooseneck fitting for my mainsail boom came out of the boom. For a picture see: http://www.hogtimemusic.com/photos/gooseneck.jpg Two of the three screw holes in the boom appear to have worn over time to become slots. Looking for any suggestions for a fix. I'm thinking of...
  73. G

    Diesels for E-27

    :o This posting reveals a very embarassing (as well as expensive) situation for me. I was unsuccesfull in winterizing my Westerbeke (Bukh) 10 h.p. diesel last winter resulting in a block crack and exhaust manifold crack in the engine. I removed and had a machine shop weld repair the cracks...
  74. R

    Fortress anchor size for 1973 E27

    I'm thinking about getting a light weight Fortress anchor as a present to my back. Their FX-7 (4 lbs) units says for up to a 27 footer. The FX-11 (7 lbs) for 28 to 32 feet. I think the E27 is probably heavier than a lot of 27 footers, so I'm wondering if I should go for the larger size...
  75. B

    E-27 fuel tank

    I have a 76 E-27 with the split cockpit and unfortunately a leaky fuel tank. In searching the threads, I found 1 listing for a retro fit tank as the original tank will only come out with the assistance of a sawsall. The tank that was suggested, had a depth of only 7". That seems to me to asking...
  76. S

    1974 E27 for sale

    Located: Lake Texoma, Texas Photos at: http://www.cool-ink.com/Boat/BoatPhotos.htm Price $10,500 Description: Bottom job 2004 Interlux Ultra New seacocks Palmer P-60 gas engine rebuilt 2003 ~35 hours by Wayne's Industrial Service New exhaust system 2003 New CDI propeller (12x7)...
  77. S

    74 E27 optional pull-out double

    Does anyone know of how the optional pull-out double berth conversion for the starboard settee worked on an E27? I have a 1974 but I saw this feature advertised on a 1978 model. Thanks in advance. Steve Slaughter
  78. N

    wood work on e-27

    what kind of wood are the two main dividers between the v-berth and the head in a 1974 e-27? what is the best way to refinish it? the wood is old looking, many holes, many scratchs. would you varnish or just sand down to raw wood and stain?
  79. N

    mainsail/jib for e-27

    looking to buy mainsail and jib for e-27, hopefully in good condition. will be used on SF bay, so hopefully they are not too blown out. will pay cash. cheers, nathan
  80. N

    atomic 4 in E-27

    so i am restoring an old e-27, and originally thought about inboard diesel, until i saw the price. then i thought outboard on bracket. i did this, but i think it is terribly ugly and cumbersome (have to life bracket, 9.9 engine is close to 100lb, gas tank in cockpit) i have heard mixed reviews...
  81. S

    Spreader base bracket for E27 HELP!

    HI, everyone. I am in need of a spreader base bracket, (Port side) broke mine a couple days ago while climbing to install a windex. So far i have had no luck in finding this piece anywhere, places i have called are pacific seacfraft, RigRight, LeFiell manufacturing. Any help or sugestions...
  82. S

    Spreader base bracket for E27 HELP

    HI, everyone. I am in need of a spreader base bracket, (Port side) broke mine a couple days ago while climbing to install a windex. So far i have had no luck in finding this piece anywhere, places i have called are pacific seacfraft, RigRight, LeFiell manufacturing. Any help or sugestions...
  83. B

    Anchor Winch (?) on an E-27

    wincehs on an E27 I have a 1973 E27. I wonder if anyone has put a winch on the fordeck of one. MY arthritius is rather bad.... having help with the anchor would be a major plus for me. I am not so much looking for an endorsement of a brand is a winch that will fit in the small space...
  84. R

    Rubber Parts for E27

    Hi I just have ordered a bunch of rubber parts for my E-27 from Wefco Rubber and I would like to share some information with you all. The parts are the window channel, window frame filler and rub rail. Window channel - Die Number 2154 - 2.00 per foot Window Filler - Die...
  85. B

    E-27 window leaks

    I am sure I saw a listing for replacement fixed window gaskets but I do not seem to be able to find it on search. Does any one remember where it was available. May be am just having a senior moment (far to young for that). I have found the tape for the frame to cabin seal, but not the glass to...
  86. J

    Depth transducer on E27

    Hi folks....I am refinishing the below waterline hull which has years of "who knows"protective paints. I would like to know .........Do I paint the bottom of the bronze/brass fitting which houses the transducer? Is this a lexan or an acrylic plug? Thanks for your feedback.....John
  87. C

    Prop for E27

    Has anyone used the Indigo prop?? How was the performance on your boat?? Thanks, Chris
  88. M

    E-27: stepping the mast

    Some of you may remember my adventures last fall in unstepping the mast on my 27 with the help of a local bridge. Now that it is spring, its time to reverse the process...and I'm still too cheap to hire the job out. So, here is what I'm thinking: What if I were to raft up to some friends...
  89. T

    E27 Shifting Very Hard

    I have a 1975 with inboard (Atomic 4). I am having a very hard time shifting it into gear. I can get it but it takes a lot of force. I also can not get it to stay in reverse without holding it down. Any ideas whould be great. Thanks Tom Heideman Basackwards
  90. S

    For Sale 1974 E27

    Located in Texas (Lake Texoma). $11,000. Ready to sail. Well maintained. This boat has new bottom job and newly rebuilt inboard. Contact Steve at steve@paperlesslawoffice.com Photos at: http://www.cool-ink.com/Boat/BoatPhotos.htm Bottom job 2004 Interlux Ultra, taken down to gelcoat...
  91. S

    Exhaust on E-27

    I have a 1977 E-27 with an Atomic 4 that I have had for 1 year. Please bear with me this is a convoluted explanation but there is a question in here somewhere. This was my exhaust layout - leading aft from the engine, screwed into the exhaust flange is what appears to be a 16" piece of pipe...
  92. R

    E27 Tiller Fork

    I picked up an E27 last fall - Love the Boat! However, the tiller fork is broken. The past owner bolted stainless straps on each side for support. It functions, but doesn't look all that great. Does anyone know who I can contact. Or if anyone has completed a wheel conversion, I'll be glad...
  93. C

    E27 Mast Step

    I was inspecting thee rig on my Ericson 27 this weekend getting things ready for the summer season when I noticed a problem on the portion of the mast step attched to the mast itself. It appeared to have had three fasteners holding the mast to its base, but one was missing, one was corroded...
  94. O

    E27 Years?

    We have an option of buying another E 27 fairly cheap, but the seller is claiming the boat is a 1968, was the 27 built in '68 ? Does anyone have the info of the prodution years of the 27' :confused:
  95. I

    E27 Icebox insulation

    I need to improve my insulation on the ice box in my E27. Does anyone have any ideas etc. on how to better insulate the box/
  96. M

    E27 Scupper reroute?

    After a full weekend of swearing and bloodying my knuckles I finally have the rusted exhaust riser and cockpit scupper hoses removed from the boat. The original scupper hoses needed replacement since they are cracked and very bad shape. The issue is whether the original design, leading...
  97. E

    E27 Hunting

    I am intensily interested in sailing, but I only have expereince with power boats. I am nearing the end of my search for a boat, having finally settled on the Ericson 27. Lake Erie is my backyard. I would be deeply greatful of any advice those of you with experience may have for me. What...
  98. C

    E27 Rubrail question

    I have a 1977 E27 that needs a rubrail replaced, anyone know of somewhere that may have decent used rubrails? Right now I'm hoping to find just a few feet to replace the section that was damaged, otherwise I'll have to buy 40' of it new. Thanks.
  99. S

    radiator refit for E27 Palmer P60

    I have a 1974 E27 with a Palmer P 60 gasoline engine. This was based on the IH60 engine seen in the Cub tractors. It is currently raw water cooled. I would like to add a radiator. I can purchase a new radiator for the IH Cub tractor. It would seem that all I would need to do is connect the...
  100. S

    Wanted Pedestal & Wheel E27

    I am looking for a used pedestal/wheel steering setup for my '74 E27. Contact Steve at steve@paperlesslawoffice.com if you have one for sale. Thanks.
Top